branson 4720

I HAVE A 2003 BRANSON 4720 . I REMOVED THE HYDRAULIC HOSES TO INSTALL A 3RD FUCTION FOR GRAPPLE. SINCE THEN THE REAR HYDRAULICS HAVE NOT WORKED . SO I PUT EVERY THING BACK STOCK AND IT STILL DONT WORK. MORAL OF THE STORY IS I DIDN'T TAKE ANY PICTURES. I NEED SOMEONE TO TELL ME HOW TO ROUTE ALL...

Need a TA00015460A front spindle . Seems no parts in canada. $732 if one can be found. HELP

Any leads? Google drive fails to bring up the previous posted links…

The rear wheel different lock is behind your foot where the forward and reverse pedals are you can step on the rear of lock? But then you can稚 push on the forward or reverse pedals What Am I not getting in this situation?

I am looking to buy a 2018 Branson 4720 with front end loader and hydro trans. I really have no idea what kind of mark up these machines have and its hard to find much info. My closest dealer is offering them at "wholesale" but I am not buying it. It may be a real good price but the msrp of...

Just changed the battery in my Branson 4720H yesterday for the first time. I embarrassed and should've paid more attention when I removed it, but now can't get the battery bracket seated on the new battery. I'm confident it's the correct battery as I got it from the dealer who sold it to me...

would this stuff work?

I can't say enough good so far about the Branson tractor after shopping for almost a year and now having it for two years and lots of hours. How simple and dependable it is and with any mechanical ability I don't think there is anything on it if needing fixing I would tackle myself. I was Leary...

Well, some may remember me purchasing a used 2005 Branson 4720, with the 8620 backhoe. Upon delivery I had some issues with what I was told from the dealer, etc. This was back in April. I fixed a bit of odds and ends, especially with the hoe, put new tires on it, etc. Been going through...

Looking for any info and if this is a smart decision how have the 2016 Branson's been running. Are they planning any big updates in 2017 for the tractors

I have a 2005 Branson 4720 with the Ag tires. I have found a set of Kubota 6060 turf tires and wheels. size These are new take offs from a Kubota 6060. Front size is LSW 305 R 343 and the rear size is 610 R 470. My question is will the wheels fit my tractor? are the bolt patterns the same? 8...

I was running my tractor and got off to do something. When I got back on, I put it in gear and it would not move. I moved the range from 3rd to 2nd. nothing happened. Any suggestions?

Have owned this tractor for 3 years now and never needed to use the lights . Last night I needed to snow blow so my wife could get out today. Had a really hard time as the back up lights would only stay on for a few seconds As soon as the reverse pedal was pressed the lights would come on then...

Having problems with the 3 point hitch on my Branson 4720. It will not move when the tractor is cold but after it warms up to operating temp it seems to work ok. I don't know if it's the relief valve or the pressure control valve. I have installed a pressure gauge on the loader. When the tractor...

Anyone know off hand what the cold Cranking Amps are in that tractor. Did nt see much in English writing on the battery. batteries 4-5 years old now and the first winter where it doesn't start . Cant turn over the engine in the cold. No colder then last year but had no problem last year...

I've just stumbled on this tractor, and I think the answer is obvious. Original owner selling because he wants hydrostatic. Clutch was replaced at 260 hrs. Clutch pedal now sticks down....he says he pulls it up with his foot. any thoughts?

Need help trying to figure out an issue I have been having with my 4720. Tractor has 180 hrs and is routinely serviced to the tee. I have had very few issues in the past with tractor and has been a pleasure to own and operate. The issue is somewhat wierd and want to know if anyone else has had...

My Branson 4720 was running fine one day than the next it started losing power. I was doing light work so work so I tolerated it at first. As the day progressed it got worse and had to shut it down. I discovered the fuel pump wasn稚 working so put on a new Mr. Gasket pump with an in line...

I have a seven year old 4720 with 700 hours. I just bought a five foot 3pt tiller and am having problems when engaging the ground. At first it was OK but after about 30 minutes the PTO shaft quit rotating when the tiller is lowered to engage the ground. It also makes a "ratcheting sound...

Hello to all. First post on a great site. I have a 4720 with loader that to date (230 hrs.)has been a great machine.Recently I went to use the tractor and the clutch seems to be stuck in the engaged position. In other words, if I jam it into gear, as i am moving forward and engage the clutch...

can someone give me a rough retail cost of the following part number TNA4020999A9 it is a (new style 1 piece u-packing for the hydraulic piston) also does someone have a repair cd or manual for a 4720 branson tractor. i have to replace the packing on my implement lift on the back of the tractor...

Greetings, I have searched through some of the threads and have not found my particular problem listed with a resolution. seen some comments about bad pto's but never a followup to tell us how it ended. well I have a new branson 4720 and just boughtlast fall (65 hours now) and a new 50" pto...

Does anyone know what the linkage on the left side of the rockshaft is used for on a Branson 4720. I asked my dealer and he said "Don't worry about it you'll never use it."

well it's a done deal.... i bought the 4720 w/fel and a 6 1/2' sealed bearing disk this morning. i got it for 19,178.00. i did have another offer that was a little bit cheaper but it was a couple hours drive and craig gave me another 300.00 off so i was satisfied with his deal. i was also...

Have a price for 4720 + BL20a loader + 7620 backhoe for $21,915.00. Sounds like a good deal to me, yes all new equipment. What do you guys think? Jerri

I was looking at a Branson 4720 online. Can someone tell me how good are the Branson loaders and backhoes? Does the tractor have enough hydraulic capacity to run these attachments well? Are the number of remotes limited so you cannot have a 4in1 bucket? Will the new larger 30 series tractors...