codes

Want to see if anyone has any ideas I bought this tractor back in December...it's a 2019 with like 630hrs on it. Cab, loader, hst, etc. Wanted a cab for bushhogging. Now maybe regretting my decision to get a mahindra. When I got it, I called my local dealer, mainly to get the operator manual...

Hello everyone, I have a 2017 XR 4140 H with 452 hrs and has been a gem till yesterday, I was snow plowing for about an hour and a half ,then the rpms started bouncing around, the diesel knock got very loud and it stalled. Error code came on the dash F3 &F4 (1076) and F31(132). I started it back...

Recently i cleaned my CAV injection pump because everything was stuck. After this starting was difficult and the throttle at idle speed was no longer in its original position. What did i do wrong? Used govenor spring code number 3, is this correct? The older pump has the following numbers: CAV...

My MT357 has regened twelve times now in twenty-five hours. Last two times it was one hour of running. Today it showed some codes , it showed like a open book with the letter S and number 3253 and on the bottom of that there was F11 and to the right of that the number 81. The Dealer is closed...

Service engine light on Getting Codes DTC 833 F029, & 833 F026 where can I find descriptions and how to reset service engine light

I have a Kioti CK3520 that just turned 50 hours and today the CEL light came on and the following was displayed. dtc 8241 F22 8241 F01 END I am going to try to get to the dealer tomorrow but was wondering if anybody can give me a heads up on what all this means. The Owners Manual was not much...

2015 john deere 5085m keeps throwing code ECU 3673.07. It worked fine last fall, it’s been sitting pretty much all winter. Thanks in advance

I have a L S XU 6168 its a 2019 with 230 hours it has two codes F11 F31 i put two new fuel filters on it still has the codes no throttle lever or pedal however it run great it will move you just cant give it throttle PS were can i get a code reader for this tractor Any help would be...

I am looking for my diagnostics plug on my XG3037. I have read that it is under a shroud on the lower right side of the steering wheel. This is the only plug I can find. It is an 8 pin but only has 7 wires running to it. Is this it and were can I find an adapter to connect an OBD reader?