coupler

I picked up new cargo trailer this week, and I'll be going no a ~2,000 mile trek with it next month. I stopped at Lowe's yesterday to look at locks and what not, but didn't really like anything they had, if for no other reason, there wasn't a kit where the coupler and hitch pin locks would use...

I found a 14-15 inch crack today on my gooseneck coupler. The scary part is the crack is all rusted. No telling how long it has been cracked. The trailer and coupler was new in 2012. Should I weld it up or replace it. I am leaning on replacing, as it is a Bull dog coupler. Can I remove the...

Have an 8N with a broken over-run coupler. It doesn't allow my brushhog to freewheel when I disengage the clutch. Any ideas on how to get it off? I assumed from looking at it you just removed the set screw and the Zerk fitting and pounded out the pin with a punch? I've beat on the end of the pin...

I am trying to locate a Quick Attach Coupler Weld-On for my CK3510HB/HST. I searched this forum but found no results. Was wondering if anyone else may know if this would work. So may times I would like to have a ball hitch on the front, or use the front to pick up railroad ties without having to...

Hello, I need to replace a couple of the Hydraulic QC female couplers. The part number called for is AM102487 and the are currently running $36-38. Does anyone know if the LVA16843 from Summit will work? Asking because they are half the price of the AM102487. Alan

Just got done rebuilding the engine coupler, found all the parts required. listing the part numbers from Neapco but may be crossed reference, they are 1000 series PTO yokes. I measured and found the dimensions at https://www.neapcoaftermarket.com/wp-content/uploads/2019/11/2001ptocatalog637.pdf...

Now I need to get a bunch of hoses made.

Hi , We are doing maintenance on a NH 2120 compact tractor with a NH 7309 front end loader. There are a bunch of hydraulic hose quick couplers and most are leaking. I looked at the videos about removing/replacing the internal O-ring on the one side to stop the leaking. Then looked up the...

Or Kubota LX2610's LA535 loader needs a new o-ring in the 1/4 in Parker 60 series female quick coupler. As far as I can tell, it is a 11/16 x 9/16 x 1/16 o-ring. Can anyone confirm this; most hydraulic sites don't list the actual dimensions. Thanks

Does anybody know where I can acquire a Safeway S460-2 "O" ring kit for Safeway S40-2 hydraulic connector..... I have one that is oozing fluid and want to replace just the O ring.... So far Safeway who actually list the S460-2 "O" ring as a replacement part has not been responsive to my...

How well do Demco EZ-Latch trailer coupler work? We rented a Uhaul trailer for a day use and it had one and it seemed nice. https://a.co/d/9zAdd0S

Installed my DKA144 3rd function valve kit per the instructions and I have leaks. The directions say noting about using teflon tape or threadlock. I have leaks however. Got the hoses and couples threaded together pretty tight. Not really sure what is going on though. Was I supposed to use some...

I'm getting a 3rd function kit and some attachments and was wondering what is the best coupler to go with? Seems like the flat face couples always come as an option for attachments for some extra $$$. Are they worth the extra money?

Information to post and pass on. John Deere Deluxe SCV Coupler updates John Deere Hydraulic Quick Coupler Socket Replace in pairs Deluxe SCV valves new coupler design 2 x John Deere Hydraulic Quick Coupler Socket - AL221083 2 x John Deere Clip - L158630 2 x John Deere Hydraulic Coupler Sleeve...