Source for SA324 loader quick coupler O-rings?

[WINspeed]

Hello Yanmar people, I have a 2020 SA324 and the loader quick couplers are leaking. I've searched the internet for a several hours now and I haven't found a source for the O-rings. Does anyone have info on where I can buy them or the size? The coupler part number is 198223-46250. Thanks in advance..

 

[freightboy]

Shop Parts today | Yanmar US

Find products in Parts today | Yanmar US

www.buyyanmar.com

 

[WINspeed]

Thanks for the link, That's where I got the part number for the coupler but I couldn't find any information on the O-rings to go inside the coupler.

 

[cabover4us]

I was wondering if you could match up the ones sold at Harbor Freight they have metric and sae in plastic multi sized containers.

 

[freightboy]

I was wondering if you could match up the ones sold at Harbor Freight they have metric and sae in plastic multi sized containers.

Want to make sure that any o-rings you use in a hydraulic system are compatible with the trans/hydraulic fluid.

 

[WINspeed]

Thanks for the reply, I might have to do that.

 

[Redcut]

Hello Yanmar people, I have a 2020 SA324 and the loader quick couplers are leaking. I've searched the internet for a several hours now and I haven't found a source for the O-rings. Does anyone have info on where I can buy them or the size? The coupler part number is 198223-46250. Thanks in advance..

Just replace the couplers. Faster, easier and not costly enough to matter

 

[SPYDERLK]

Thanks for the reply, I might have to do that.

If you have the sort of smooth pointed dental pick to take it out, then measure it carefully and shop McMaster Carr. By the time you order a $5 pkg of 25 or so and pay postage youll have the cost of a $15 connector invested. If you go this route please publish the size, durometer, and material. - It will be appreciated!