drive

How do you remove the frt. driveshaft on a Tz18da without removing frt axle

While replacing the plastic trans cooling fan the needles fell out of the u-joint that needs to be removed to access fan replacement. I am trying to find a replacement u-joint On the yanmar parts store it looks like you have to buy the whole driveshaft for 325 bucks I hope not I have the...

I’m looking where to get final drive parts for the front end of my s373d and recommendation on where to look

I have a Deutz 6260 tractor that has a front pro drive box. The gears in the box are damaged and Im wondering if anyone would have any idea who manufactured this PTO drive, or where I can get any parts ie gears for this unit. There are no names or logos stamped on the box except the numbers...

I have 10 acres of high desert grassland. The lot has a lot of steep hills which does make brush mowing a challenge. Fortunately I only need to do this once per year after the grass has gone to seed. This is primarily for fire abatement. The ground seems to sprout rocks, some of which are...

ISO a front complete drive shaft for a mahindra 2015 4wd gear tractor. Mine was missing when i got this machine.

My Kioti CK35 manual in front wheel drive is only powering the left wheel???

So I had my 5085M hooked up to my big trailer hauling it up a steep hill on my property. I stopped to take a pic, this one: When I got back in the cab, I put in in A1 (lowest gear), and it made an awful racket. I stopped, tried reverse and same deal. The range lever would no longer go into...

Just recently my gravel drive got a great deal of washboarding. No different equipment up and down the drive. Only real change over the last several months is extreme drought. Any thoughts that caused this and the best way to remove?

The pully on my 30" deck separated from its center ring. How do I go about removing when center of it from the shaft?

Does anybody have a video of how to replace a drive shaft on tym 200 motor to hst shaft

On the base model Chinese mini excavators with the gas engines I've noticed there are three part numbers for the main drive motors. I think they're all the same size but with a minor difference in CC. The part numbers are BM6-310, BM6-315, and BM6K-315. The part number on AGT website is the...

I'd like to meet the person who decided that the gear shifter should be placed in the path of the throttle :) Other than that, I like it. I did find that the throttle does not really feel like it is causing the tractor to move faster, just rev higher. Also, the brakes (without clutching) did...

Noticed, front wheels spinning even when manual lever in 2WD. The lever feels like it engages/disengages.

I have a ZD-1011 Zero Turn and had a question about greasing the "U" joints for the shaft that goes between the motor and hydraulic pump. Was able to get the slip joint fitting and the "U" joint on the motor side. Seems impossible to get to the joint on the pump side without removing the shaft...

Hey all, I have a d2000, Everything runs great, except, There was a little clicking noise in reverse, but all gears work. Couple weeks ago while mowing loud clicking/grinding starts coming from main gear box, not clutch bearing. I was able to locate the issue. The Reverse Idle Gear has ground...

I have portion of our property that has very sandy soil. (It is between the current creek and an old oxbow. Sand gets deposited roughly every 5-10 years during significant floods.) I use that area for recreational activities, but the sand is loose enough that there is a small chance you will...

I've been mowing on steep uneven ground the past few days and have a problem with the tractor coming to a stop all by itself while traveling in a straight line. Engine speed isn't effected; it's as if I've taken my foot off the Speed Control Pedal causing the tractor to stop. I've also seen this...

Proble we have is too many of them nasty black locust thorned trees on our property and i get a flat everytime i mow etc...Is it good to foamfill the front tires? $500 for front tires only.Any downside to foam fill?If they last 5 years it will save me money and labor. 7 16G.1W is on front...

I have 2001 JD LT155 lawn tractor with 42" mulching deck. I replaced the drive belt routing atound all guides & pulleys. When I fully depress the brake pedal the drive belt slips off the rear pulley. If I slightly depress the brake I can successfully engage the drive. Any suggestions as to...

Just got it running ,sat idle for years and now the new belt on the left side burned of in about 1 hour and was sqealling. How do I determine if it is the pump or the drive motor. I can put a cheap belt on it a see if it burns off and squeals without using leaver. Open to suggestions.

I just bought this Kubota T2290 (used) at the end of last year. It had less than 50 hours on it when i got it. Over the Winter my grandson took off the deck for me and put on a snow blower attachment (that I also bought, although I wish I hadn't now). He has since taken off the snow blower and...

Ford 555B Loader Backhoe takes a long time to get moving. If anyone has answers that'd be cool. If the tractor is cold, even when put into forward, and with the rpms raised (or not, doesn't matter).. doesn't move. I've watched my father sit on this thing for 10 or 15 mins waiting on it to...

Does anyone on here own one of these? Do you like the shuttle shift on the left by the seat? I dont find many reviews on this type of tractor.

Hello, new member here. I've got a Kioti K9 2400 bought new in Spring of 2022 that has 35 hours on it. When I start it up cold and back it out of the barn, the CVT belt often squeals loudly. Once underway, it stops making noise after a moment. If I stop and shut down for a minute, upon starting...

Other than ordering less stuff, how can we minimize the 3 point turn ruts in our crusher run driveway from deliveries. The drive is 700' so backing out is not a reasonable ask. When they crank their tires from one side to the other in one spot it makes a little depression, when it rains, the...

So I've tried adjusting the machines sticks to deal with the problem but it made it twice as worse, so if anyone knows what the name/ parts required to fix creep are I would be much obliged 2000 Bobcat 763G s/n:512258650 Contact me at 530-708-7548 (please text)