farmall 140

1958-1964 IH Farmall 140 Brochure

Hello all. Just listed my family owned 1966 Farmall 140 for sale no reserve. https://www.hemmings.com/auction/1966-farmall-other-287898

Gentlemen, I have a McCormick Farmall 140 (ser # 63353 JHC) that has been in our family since new. 1001 hrs. Always stored in a garage or a lean to. Never had to twist a wrench on it until 2 days ago. Figured I would get it running & sell it, since it is not needed on the "plantation" anymore...

Hi guys i have a farmall 140 culvator that the culvator shanks trip when barly in ground i have tighened the big nut on the springs still no good bought new ones from ag supply sam e proble can the shanks be spot welded tacked so they do not trip and were is the best spot on shank foot...

My dad passed away in 2011 and this IH 140 was his pride and joy. He purchased it from a close friend and neighbor who was the original owner. The tractor has never been more than 5 miles from the dealership at which it was purchased in Howard County, Maryland. It is an early 1970's model I...

I am a new Farmall 140 owner and will use a Cole corn planter to plant with. I'm needing some row spacing advice. I have a small 3/4 acre garden spot that I will be planting corn, turnips, collards, and squash. When beginning my rows, starting on the left-hand side of the garden, I can go all...

Can anyone enlighten me on how to get different rear wheel tread spacings on a farmall 140? I have the wheels dished out now and they are at 64 on center. What I am not understanding from the manual is the tread lug being on the inside or outside and how you get different spacings that way...

Hi! I can't find much information in converting a farmall 140 to do two or more rows for cultivating. I am assuming the tires can move out. Does anyone have info or pics? Thanks!

The engine on my Farmall 140, continually surges up and down, looking for a sweet spot. The higher I put the throttle, the harder it surges. If I pull the tractor hard, the engine will smooth out. The manual I have, said to adjust the screw on the bottom of the governor. That didn't change...

I have just bought a 197? Farmall 140. It cranks and runs good. However, when I start up a hill or first put a load on the motor, the motor will have a quick short burst of power. I would think the governor should bring the power on a little smoother and hold it a little longer. Is there an...

Hi Everyone, First post here! My father's old Farmall 140 has been having issues lately. I used it to brush hog about 8 acres and it did great, then I drove it home. One stretch of this road is a VERY bumpy dirt "road" that is downhill the whole way. After I got off the hill the tractor was...

I don't know if this is the proper place for this question, but I assumed it was a good start. I have a 1963? Farmall 140 that came with my farm that I am looking for a value on. I bought my new John Deere and ever since then the Farmall has just been sitting. It is a 1 owner, in good original...

Hi all, I'm Paul Bertrand, the new owner of an old Farmall 140. I'm hoping this site will be of help to me. I'm sure as time goes on, I'll have questions. I hope you all will have answers. Thanks, Paul

Good morning all. My 1968 Farmall 140 is losing oil pressure. Upon start-up, the oil pressure needle centers in the dial reading 0 to 75 lbs. After running the tractor about 10 minutes, the pressure starts to bleed off. After about 20-25 minutes, the pressure needle drops to the first mark...

Hi i am looking at a farmall 140 1958 thats has sideresser and culvatiors in good shape whats a fair price for this tractor thanks art Iam allso looking at a130 with only culvatiors whats a faire price for it thanks art

H I whats the best way to start a farmall thats been setting unused for 20 years has not been started in all that time it looks ok oil looks good needs battery but are there any tips to use when trying to start it thanks art

Hi i am looking at a farmall 140 with cultaviors i need to get a sideresser for it it dose not have the drive gear on wheel or counter shaft aer theases parts hard to find and how do you install them any info would be great thanks the 140 is a 1974

Does anybody use turf tires on an IH Farmall 140? My 3+ acres of horse pasture is West Virginia ridge-top "flat,' which means it is gently sloped as opposed to straight up and down. Least bit of rain, and I can't efficiently run on the lower pasture near the fence line. Been stuck 2x in 18...

Good morning all! 'Bout 2 degrees here on the ridge in west-central WV. Got about 3 acres of horse pasture that I need to lime, seed w/pasture grasses, and fertilize this spring, but I'm needin a broadcast spreader, preferrably one that will mount to the rear of my little Farmall 140 and connect...

Hello farmall experts are any cultivator parts interchangeable from the 140 and 140 high clear... Late model 140

Where does the transmission/differential vent to atmosphere? Any info would be appreciated. Thanks

Hi everybody, my name is Jeff, I'm 68 years young, and I've just acquired a Farmall 140 that spent its working years in Southern Michigan. Now it lives with me in Western Mass.

Battery discharges if I leave the battery cable connected while not using the tractor. Wiring is in bad shape. Would like to remove all wiring and replace only the ignition and charging circuit wiring. It's a 12V negative ground system with no 'external' voltage regulator. Apparently the...

I have a 1962 model Farmall 140 that smokes some/not much but tends to push oil out the dip stick tube. My FIL used it to make beds for and cultivate tobacco, corn and garden. Another tractor was used for heavy plowing and discing. So it really wasn't used hard. It starts and runs fine...

Has anybody retro fitted power steering on a Farmall 140. I am looking at an Eaton torque generator supplied by a GM Saginaw power steering pump P style. This unit is installed in the steering shaft and held so iy cannot rotate. Any info, advice etc. would be welcome. Thanks

I recently purchased a Farmall 140 and I am having trouble attachign the 60 inch woods belly mower. Can anyone please give me directions?

THE SHORT: ► Farmall 140 - 1960's ► From family friend, recently widowed ► Not currently starting ► Been sitting for 10 years in a barn ► How do I value it? THE LONG: I need some advise. I just purchased 7 acres and I'm in the process of creating a farmette. I'm a teacher so I have 2.5 months...

Good afternoon all, I'm currently watching a 1962 Farmall 140. The seller says that it as been completly redone. Also have new tires and new battery. My questions: 1-What would be an adequate price? He is asking 3000$. 2-What to look for on the tractor? (known issues, cracks, ...) Thanks...

I have a Farmall 140, serial number 1129 J. Someone changed the original generator and voltage regulator out for an alternator. I'm having trouble with the alternator, and I don't like the way it sets out in the weather with no guard around the front pulley/fan, (I can see someone...

I just got a new house with 15 acrea mostly pasture and I bought a Farmall 140 with a woods belly mower I'm new to the tractor thing and I've been mowing my pasture with it I've tried up and down the hills and side ways with the engine up hill but I'm having a hard time getting comfortable with...

I have a farmall 140 that some one is giving me it has not ran in a year or two When u tried to start it last year it would Fire up then it would die rite away can some one give me some info on what to Do to get her up and running again

Has any one ever built there own 3 point hitch for a farmall 140

I just purchased 15 acres and was given A farmall 140 with a woods belly mower on It and I was wondering about how safe it is To mow on hillsides with this tractor my land is Not real steep but there are some rolling hills And bumpy ground in the pasture

Does anyone know how to replace the battery in a 140? I can't seem to figure out the best way.

I too, have 66 Farmall 140. I had it tuned up last year (after sitting in storage for 10 years) new carb kit, plugs, points, condenser, and changed fluids. It was running great. It has a belly mower on it, and that's what I'm primarily using it for, mowing some pasture land. The land is...

I bought a 1966 Farmall 140 last week with cultivators and side dress attachment with hopper. I want to change all the fluids. Engine: I plan to use Castrol 10w30. Is that o.k.??? Transmission: What do I need to use 80-90W gear oil or hydraulic fluid? The local Kubota dealer (also sells...

I'm intersted in selling a 1960 Farmall 140 tractor. I am looking for some suggestions of what the asking price should be. The tractor is still a 6-volt system, needs painting; steering is good; tires are fair; runs good; very little rust, has always been under shelter. Has quick hitch with a...

hi guys, new here. well i just bought me a Farmall 140 ( my first tractor ) I been lurking around and found out that this tractors are known to be reliable and last a good while. I dont reilly know that much more about it, but i got it to crank and the engine sounds in good shape, the...

I am looking for ideas or plans for an adapter for my Farmall 140 so that I can use 3pt implements . The implements for that single-point fast hitch are very pricy. Thanks in advance.

is there a way to use the farmall 140 hyd to use hyd cyclinders for a snow plow

Hi All, Does anyone happen to know, off hand, if the old Farmall 140 (1962) has a locking differential (Positraction)? Guess I could take it out to a muddy area and try to spin one wheel. Problem is, it seems to me that if it doesn't have a locking differential (and I suspect that it...

In the next week or so I should be picking up a 1967 or so Farmall 140. It has a 5 ft belly finishing mower. I was planning to use it to cut the fields and grass at my house, but was also wondering what kind of other work this tractor can do.... Specifically, has anyone fabricated, or can a...

I have recently purchased a Farmall 140 about a '67 model I think. I can't find the plug to check the transmission fluid level, does anyone know where it is and what to put in it?

Kind of a coincidence to the thread below--I've been looking for a refurb project tractor or a running collectable for some time now. This ad caught my eye this morning. Anybody know anyhing about this model, its value, usefulness, problems etc? I have not seen the tractor or talked to the owner...

I've been looking for a refurb project tractor or a running collectable for some time now. This ad caught my eye this morning. Anybody know anyhing about this model, its value, usefulness, problems etc? I have not seen the tractor or talked to the owner yet. The ad is posted verbatim below (I...