fix

Can this link in the New Holland Operating forum be fixed? https://www.tractorbynet.com/forums/showflat.php?Cat=0&Board=nhown&Number=89244&fpart=&PHPSESSID=

Hey everyone, I have a concrete slab in my driveway that has become uneven over time, and I’m looking for the best way to fix it. What are the most effective methods for leveling concrete? Are there any reliable DIY solutions, or is this something best left to professionals? I’ve heard...

Seems like every time I get off my Jinma 354 I accidentally hit one of the power switches. This can also occur when I use the cover…I also blame my cat for hitting them or maybe it’s the squirrels. Since I just wanted something basic I used a Ford Escape brake pad spring clip and bent it to go...

Is there a product that will keep things from rattling in this 2" ballast box receiver?

Just want to pass along a problem with a happy and cost free ending. I have a Kubota L3830HST, bought new in '04. Recently, when I turned the key sometimes, nothing happened. I thought it was the solenoid, or a flat spot in the starter. When I called the dealer to see about a starter, they asked...

I guess it doesn’t take much to bend the isolation pins for the boom and swing arm on a BY85 backhoe; it seems TYM may have made these with softer metal on purpose. Would you guys bother looking for a machine shop with a press to straighten them back out, did you buy your own press or do you...

I've had a slow leak on the M59 since forever. One of the rear 17.5x24 Titan industrials needs airing up every two months. The tire shop where everyone gets tractor and heavy equipment tires recommended "the original Fix a Flat" for truck/SUV. It's a 24 fluid Oz pressurized can with a hose and...

I have a 1963 MF35 that won't start. I took it to my local dealership and they replaced the starter but it hung up also. It appears the flywheel teeth are destroyed causing the starter to catch. So here's my dilemma. I'm $400 into the new starter, labor, etc. And now I'm looking at about...

This comes under the heading of no good deed goes unpunished. I agreed to help my cousin straighten out and resurface his long washed out driveway, using a box blade and york rake. I hardly ever use the box blade and actually believe I only used it one other time since I bought it 14 years ago...

If you have read my other recent thread on my current 500hr service, you're up to speed. https://www.tractorbynet.com/forums/threads/do-you-stop-when-something-breaks.478473/ As I wait for parts, I decided to get my butt out there and continue working on the tractor. First thing I did was drop...

Let me add another sensor malfunction thread here. I was mowing and suddenly my MT3 47 dropped into limp mode. F02 S636. I found a thread here and followed it to make this repair: MT3 Crank position sensor location?? It was the crank position sensor, and it was VERY easy to change. 14mm...

BX2350D dead instrument cluster (water temp, fuel level) I used a holesaw to drill a hole into the instrument cluster, through the plexi glass, circuit board, and back cover. All of the idiot lights still work in the cluster after this. The fuel guage didn't work before this, so I look at the...

I have not posted here in some time but trying to find out if anyone else has experienced an internal hydraulic fluid leak which comes out a bottom seep hole about the center of the tractor where a cotter pin sticks out of the housing. Dealer wants $4000 to split the tractor to replace either...

Hi - have a 2013 Kubota L6060 cab with R4 tires, original. Machine is 2013, we got it in 2015, can't recall total hours but it isn't high, almost all use is on snow or gravel roads for property maintenance. Front tire has a slow leak, had it fixed once but low faith in place that did it (funny...

We've a fairly nice GE washer (large stainless tub, more settings than I can shake a stick at) that started making a racket on the rinse and spin cycle. Seems like the suspension is going. A quick check online shows that replacing the shocks is easy, but the parts alone are about $200 for all...

This isn't about a tractor, exactly, but I have a tractor, so I feel I should be allowed to cheat. I have a gas EZGO with a big hole in a tire. It was patched with a plug long before I got the cart, and it held air for years, but then it started leaking. I redid the patch, and it's not working...

I pass along so it might help someone, seems kind of unusual. I bought my Mahindra 5010 used. After using it awhile, I started noticing some kind of fluid on the ground after I moved the tractor from where it was parked in the pasture the night before. But it seemed to be under the wheels, not...

I just had a 60X60' metal building put up and Everything is wonderful accept the lousy concrete pour. Aside from having a bunch of cracks everywhere there is a low place in the center of the floor where water will hit the concrete out in my covered side shed and end up piling up on the wall and...

If anyone is looking for a fix of the control valve ball and socket and you have some basic mechanics skills please follow the link. Maybe a moderator can combine the threads and sticky this. https://www.tractorbynet.com/forums/threads/ls-lb1100-backhoe-control-valve-issue.468128/

Found an old Woods Dixie Cut brush hog on craigslist. Little to no rust but a leaky seal, very worn blades and cracked lift arm (which was welded on.) Figured out it's a Woods M5-3 - was able to get the product manual from woods which was nice. Got a new seal from german bliss - changing...

I got this Tractor as a barn find only 85 hours. It hasn’t been turned on in years. When I go to turn it on all it does is crank. I emptied all the fuel out of it and replaced it with new. Still does the same thing. All the fluids are full. I pulled off the injector lines and they had fuel but...