implement

John Deere does not offer any disk implements for the subject model. Any feedback on the inherent risks of overheating, transmission strain, or stress on the frame, etc. by using the tilling disk shown would be appreciated.

I just completed an implement dolly to store and move snow implements on. Its made from 4" x 5" x 1/4 angle with 5/8 rod welded on the ends for axles. Wheels are foam filled from harbor freight and low quality. No highway runs! The holes and loops seen are to attach ratchet tie straps to...

So I 'think' I've bought my first tractor (it's on hold), and now I need implements. I've read a bunch and watched a lot of videos on the subject of gravel road maintenance, but I'm still unsure what I need. The road is about 14ft wide. My road is in OK condition (mild to moderate wash...

1620 tractor from around 1996 with about 350 hours is having trouble only when dumping. Has the New Holland 7308 bucket. Doesn't matter if the bucket has a load or not. It starts to dump and then stops and then eventually fully dumps. Checked fluid and it is full. To my untrained eye it looked...

I'm looking for a box blade that a workmaster 25 can handle. Any suggestions?

I have noticed that my farm loader (bucket), snow plow are very sluggish when machine is at idle RPMs. Is this normal? I serviced the hydraulic system, changed out all filters including the strainer and still have the same sluggishness. If i crank the RPMs up to 15K, the implements seem to...

Hello, A friend recently offered to give me a Massey-Ferguson sickle bar mower that has been sitting in his field for the past few years. I looked at it and it has only surface rust and is in good shape, and It would make a nice addition to my small collection of tractors. However, the only...

Just picked up a 3 point splitter that I'm going to use on my Kubota BX25. I know, I know, it's going to be slow etc...I don;t do much splitting so not having a small engine sitting idle for long periods of time are the major pro to the purchase. I picked it up used(looks like it's hardly been...

While browsing grapples for my Yanmar YT235C I ran across an ad from a fairly large tractor dealer that's not far from me. After looking more closely at the pictures I liked what I saw so I started asking questions. He claims that they are made by Carolina Implement (not to be confused with...

I am interested in getting a rototiller for my Kioti LK3054. The tractor has a rated engine HP of 30HP, but is limited at the PTO to 25HP. I am finding conflicting information online about HP capacity and a tractor's ability to pull a tiller and I'm hoping someone on here might be able to speak...

Hello Everyone - Can someone send me a couple pictures of the front sub frame on a 955 that a snow blower or broom would attach to? Any help which pictures / instruction would be great. Thanks Scott

I recently added the Ventrac Three-Point Hitch kit to my 4500Z machine. The kit is labeled as a Cat 1 hitch. When I try to attach certain Cat 1 implements to the unit's hitch, the lift arms do not extend wide enough to accommodate the pins on the attachments. On a rake, I had to purchase the...

I bought a regular A Frame toolbar at an auction and this came as part of the lot. Trying to figure out what it is and what I might do with it. Thanks, Chris

Order our most popular Bigtoolrack Ultimate Rack Combo and get our Quick Hitch and 5N1 chainsaw holder absolutely FREE!!! Plus you get FREE Shipping! Over a $700 Savings! Our Ultimate Rack comes loaded with standard features…..take a look….You get everything you see here and more. Limited time...

When I bought my SA425, I got a package deal: Tractor, Box Blade, 5' Rotary Cutter, Canopy (which I've not put on), and the 18' Trailer. I added a Landscape Rake to the deal. I've not used the BOX BLADE yet, but the Rotary works great (Agri X ATLAS Agri "X Rotary Cutter » Darrell Harp...

Anyone know any history on rollins as a farm implement company? Were they bought out by somebody else? Trying to track down pieces/parts for my rollins rotary cutter. Not much luck finding any under that name other than a few auctions of old equipment.

I am being gifted a 54 ford jubilee tractor and I am trying to figure out what attachments will work with it and would love all of your help! I have never used this kind of tractor before and have limited tractor knowledge since most of my experience has been no-till. I am transitioning...

The overall width of my tractor is 6 feet. I am intending to buy a land plane/grader for driveway maintenance and general landscaping and I'm looking for opinions on whether a standard 6-foot grader is adequate or if it's best to go with a seven-foot grader for coverage outside the tractor...

Hey guys. I've been reading your discussions for months but just joined today. I bought a Massey Ferguson 1526 (25HP) a few weeks ago with a box blade and I'm looking at getting flail mower now. This is my first tractor and I'll be using it around my property and as an addition to my small...