international

Hi All, I have a old 414 that is outside, we had lot of rain this winter, anyway just went to see how the old girl is as have some chores, and found the intake filter full of water, so naturally it has made it's way into at least some cylinders. Of course I want to get it going ASAP as I do...

If you own one of these models, can you tell me the diameter of the pins at top & bottom of the side link, and the approximate distance between the pins (from hydraulic arm to lower link)? The part that fits these tractors seems to be quite common, but none of the vendors offer actual...

For quick reference here are a couple other related threads: Pre-purchase - International 444 gas - been sitting for years. Trailering - Trailer rails are 76" apart, tractor with wheels is 82" wide - take wheels off? We just bought a 1968 International 444. For some of the details on condition...

All, I am looking at an International 444, gas engine, with a loader to try and get something going on a machine for not a whole lot of $. That sounds like quite the risk, I know. Ive got a lead on one that isnt running. Im pretty good with the fuel and electrical systems. I think I can...

And if so where can I get a new pitman arm? Will a New Idea PA work? Mine is 35.5" long. I know, I should go find some hornbeam and make my own. Maybe someday but not yet. Thanks

bought an ih 584 and the pto lever was stuck on when purchased got it all freed up and it engages well and the plunger works up and down, but the pto will only spin at high rpm and can be stopped with a 2x4 with light pressure, put pressure gage on the line coming from the valve body where the...

Hi first time posting to this forum I bought a international 350 last fall to brush hog a 30 acre field as the kioti I have doesn't have the power to do it picked it up cheap didn't know much about it I hooked the brush hog up and was playing in the yard got the pto turning threw the brush hog...

Looking for some input on this. Seems like a low price for this machine https://bid.damewoodauctioneers.com/ui/auctions/120172/15838822

Have the 1971 International 3444 Industrial TLB which is an absolute beast of a machine for its age. The front loader cylinders are leaking. I have the kits to repack the seals. Was wondering if anyone has found replacement bolt on cylinders in case the seal kits don't work. I've searched...

Chisel plow with 3 point hitch; heavy duty implement; 3 rows of plow tines; 7 tines (movable with spring reliefs); points are sharp (not worn). Bought used in good working order. Used once to plow 4 acres. No problem to pull with 50 hp tractor in hard clay soil. Located in Amissville, VA...

I have a 1974 international 2400a 3 cyl diesel. Runs good doesn’t seem to smoke more than usual but oil is grey and overfull. Are these known for head gasket or is it something more serious ?

Hi everyone I recently added to my project list a pump rebuild on a 1985 case-ih 485. Project started as someone else's good idea and I'm left trying to get it to back together and running again. I either need a reasonably priced good used injection pump or a parts pump. Does anyone here know...