kubota b2400

I just purchased a tractor that doesn't move. The former owner said he owned and operated the kubota for 3 years with no issues. Once the tractor hit 300 hours he decided drain the hst fluid and change the hst filter. He said he used kubota udt fluid and a kubota hst filter. He drained the...

I need to hear from you guys on this one. It is driving me nuts. Note that this problem has been going on for YEARS. When I go to start the tractor (after preheat) I turn to "Start" and you can hear the starting solenoid clicking like it wants to engage. I have to repeatedly CLICK-CLICK-CLICK...

Hi guys. I'm looking to buy a Kubota B2400HST for general mowing work, front end loader stuff and some light log hauling in the woods. I'd probably like to also run a small chipper and log splitter, as well as a saw bench. Have we got many owners of this tractor here? I'd really appreciate your...

i purchased an older lowhours b2400 series tractor last fall and want to go to turf tires. i have had no problem finding them for the rear. but i am having an issue finding them for the front. my tractor has 10" rims on the front but requires 12" for the correct turf tires 23-8.50x12. the...

Hey guys, I have a B2400 HSD 4wd with 730hrs. I bought it at 620hrs about 6 years ago. So not much use. My issue concerns the center front axle (pivot?) joint which is leaking oil. I first noticed it a few years ago and my Kubota dealer said since it was only leaking a few drops a day.. and...

my 1996 b2400 dynamo (that's what kubota calls it) no longer can keep up with my nighttime lighting (all LED - only 20W total). if i run in the dark for more that 2hrs, i start loosing LEDs and the tractor doesn't have enough juice left to start again, without sitting on a charger for a few...

Just changed out the HST transmission which was a royal PITA and now neither one of the PTO engages? Did not touch anything on the rear differential and they were both working before. I can depress the clutch fully and the input shaft stops rotating, shift the 540 PTO into "engaged position" and...

Hey all, just thought I would post up the fix I put together today. Have creeped the forums a few times for help, hopefully this helps someone else. Yesterday while working on a steep incline the cast section of my front axle that attached to the steering arm broke. Did not even want to...

Hello, I'm new to the forum and I have an issue with my Kubota B2400 occasionally making a clicking sound when trying to start. After up to a dozen attempts, it will start. I saw something in a post about a starter relay by John Deere that worked for someone. Any ideas for a fix?

Hello, I am in need of some help on this tractor - Kubota B2400 HST 1650 hours and 60" mower. When pushing the forward/reverse pedal, tractor jumps a little, but won't move but a couple feet if you are lucky. The hydraulic pump has been replaced, lines checked, etc. I am hoping it's not the...

I have a B2400 with a trencher and a front blade attached. I recently had a leak in a line. I replaced the line and now I can not get the trencher to raise up. It is acting like it is trying to lift but is unable. I have started the engine, left it at idle, cracked open the line to make sure...

Hello Im new to this fourm but I have 2 items I need to sell. Mower deck C60-24B and a Grass catcher for the same tractor. Best offer on both. Grass catcher was only used a few times, its all there. All in decent shape 3308420705 Ravenna, Ohio

I need to stop a leak in my Kubota B2400 axle housing. I have removed the right rear wheel, removed the 10 bolts holding the axle housing to the differential. How does one go about dislodging the axle housing from the differential? The 'seal' between the two is created with a compound Kubota...

Help im tring to get a part # for a ridgid hydraulic steering line i found the line on a post

Hi all. I have read a lot of discussions about this Kubota probleme where the starter solenoid clicks about 10 times before the tractor finally starts. Il have had this problem for about 3 years, tried everything (and when I say everything, I mean everything, but cant find the solution. I read...

Hi, I am having difficulty undoing the bolts that secure the 3 blades. I'm turning anticlockwise, but the whole spindle assembly is turning together rather than loosening. Any suggestions? Thanks in anticipation. John

I have a Kubota B2400 that was bought with a back hole on it I remove the bake hole to use a Burch hug but the 3 point wont lift it off the ground. it will go up and down when noting is attach to it. also when it is up and I stand on it, it will go down it will not hold my weight. can you help...

Hello, Can anyone recommend a place to find Kubota parts? I'm aware of Messicks and the other big ones, just thought there may be some obscure ones that I'm missing. Thanks. Tom

Anyone know if they have a conversion for the front bucket to make it quick attach, so you can use the quick attach pallet forks, grapple, etc. thanks

I have a Kubota B2400 HST with loader and belly mower and turf tires. It has 335 hours on it. Stored inside. Runs and looks great. I am looking to sell it to upgrade to an L3800. Any pricing advise? I checked tractorhouse.com but there really wasn't much comparable. My searches led me here...

Hi Guys, I have a Kubota B2400 HST I have been using for 10 years. Two days ago the bucket and the 3 point stopped moving. This tractor uses the same hydraulic pump to run everything including the drive system. The tractor will move around with no problems. I changed the hydraulic fluid...

First, I would like to introduce myself. I am new to Texas and owning land. This is my first tractor. I have very little previous experience working on mechanical equipment. I am an Electrical engineer and have worked on many things such as Radar/Communication equipment in the Navy, just not...

Just joined today as I'm about to buy a used Kubota B2400. Model year between '95-99, not sure exactly. It has a Loader and Backhoe and about 2000 hrs on it. I am paying $10K for it. It's in very good condition for the age and hours on it. Can anyone tell me if this is priced too high or if...

hello, I am looking to make an offer on a Kubota B2400 with loader and Backhoe it's a 1998 in fair shape with 301 hours any help on how much a fair price is would be aprecated. Thank you, Steve

hello, I am looking to make an offer on a Kubota B2400 with loader and Backhoe it's a 1998 in fair shape with 301 hours any help on how much a fair price is would be aprecated. Thank you, Steve

Has anyone replaced the seal that goes in the back of the bell housing where the shaft comes out to go back to the transmission? Just wondering if The shaft comes out without splitting the tractor? I have a pretty good leak developing and need to replace the seal, really hoping not to have to...

Have only removed my Kubota B4672 from my Kubota 2400 HSD ~3 times since buying new in '97. When I put the backhoe on it has always been a 2 person job. In trying to install it yesterday I forgot whether the '3 Point Limiter' went over or under the lift arms. Searched this site and found an...

Does anyone have access to Kubota documentation that would tell me what year a Kubota B2400 with serial number 70212 was manufactured? thanks NedPA

I don't seem to be able to find the drain plug for the front transmission hydraulics. I have compared the manual and several other internet graphics but I am still at a loss. It does look like there could be a plug on the side of the case, but I hope not, because it is behind the mounting...

OK. Sitting up sick with what is either a nasty cold, or the flu. I'm up, I'm bored, so the time has come to write up the "transformation" of my little Kubota B2400 into a small woodlot logging machine. This has happened over the course of a few years now, with me humming and hawing as to...

After lurking for a long time I finally have a question that the search function cannot answer. With winter approaching, I need to add hydraulic remotes to my 1997 Kubota B2400 HST to lift and turn a snowplow. I cannot find any information on how to do this. The most important thing for me is...

I am interested in putting a rear snowblower on my B2400, is the BL2660 correct model? I would also like to put a blade on the front, either using the the loader or remove the loader and attach the snow blade. Would FZB2019 blade work? Does anyone have experience with curtis loader attached...

Need some help here. I have a 1500 hour B2400 HST. Here is whats going on. All the hydraulic functions work perfectly including the FEL and the 3 point. In REVERSE the power is completely normal. Put it against a tree in reverse and she'll spin all four no problem. The problem is VERY LOW POWER...

Need some help here. I have a 1500 hour B2400 HST. Here is whats going on. All the hydraulic functions work perfectly including the FEL and the 3 point. In REVERSE the power is completely normal. Put it against a tree in reverse and she'll spin all four no problem. The problem is VERY LOW POWER...

I won't drag this out too far but I need help with this one. The tractor is a B2400HST 4WD with just less than a thousand hours on it. The Hydrostat seemed to be showing some signs of a potential problem during the last 3 to 5 hours of run time. It would seem sluggish or weak but I had not...

hi, i have a 1995 kubota b2400 which i recentley bought. i was using it for 1-2 hours when i developed a problem. i was using a scrape blade to smooth my driveway when the 3 point hitch would no longer go up . while i was able to finally get it to go to return to my garage, i turned the...

All hydraulics on my B2400HST are unresponsive except power steering after transporting. I have a trencher and backfill blade on this tractor and the 3 pt is restricted from movement normally but it can be raised alittle without bending support bars. That being said I can say that the 3 pt...

Hello, I just recently purchased a used B2400 Hydrostat. I was hoping to use the 3pt snowblower, that I used last year. But when I measured it today it is 6ft. I bought it used last year to use with my Belarus 310 tractor, it did not work so well because the tractor moved too fast in reverse...

Originally posted in Kubota section, no replies. Hoping someone on here might be able to giveme some advice before I start doing something crazy. b2400 jumps out of gear -------------------------------------------------------------------------------- Intermittent problem, in high gear and...

HELLO, I HAVE a PROBLEM WITH a B2400 TRACTOR. SYSTEM WILL NOT OPERATE IN EITHER DIRECTION DRAIN OIL AND EVERYTHING SEEMS NORMAL, NO METAL RESIDUES OR SEAL ELASTOMERS WHEN DRIVING THE PTO BEING ABOVE THE CLUTCH PEDAL IS LISTENED TO A VERY STRANGE NOISE IN THE HOUSING OF THE CLUTCH. HST...

HEY GUYS i might need to sell my kubota b2400 (1998) it has only 410 hrs . Has FEL. 6 ft. back blade, 5 ft. Befco finish mower, and detachable toothbar.Tractor and all implement alwalys garage kept. also is HYDRO TRANS. ANY IDEAS OF SELL PRICE IF MY WIFE HAS TO SELL IT.

I just purchased a B2400 with LA 351 loader.When I try to remove loader,it will not release from fixed pins so I can drive out.I put the bucket on ground,remove pins on loader frame,tilt bucket down,loader arms tilt forward but do not release.Am I missing something ? There is no manual Steve

I have decide to change the oil in the front axle from UDT to gear oil as it has been leaking along time. The manual says use SAE 80-90 but I have a drum of EPB 80w-90. Would this oil be suitable?

New to post here but I wanted to bragg a little on my new to me Kubota B2400 4X4 HST tractor. Saved me $1200.00 dollars this weekend putting down new sewer field lines. See Pictures and descriptions here> Picasa Web Albums - Jim - New Field Lines . I love my little tractor!

My 2400 tends to whine a little (as does the rest of the family but that's another topic) when I first engage the tranny going in either direction. Is this normal for these hydros? It appears to work ok, the fluid level is full and the fluid is clear and clean. Thanks for any insight.

Hi All, Just bought a used B2400 Kubota. Tractor seems to run really nice, but I cannot for the life of me find how to hang the belly mower so it doesn't lower with the 3 point. I have a box-blade and the primary use for the tractor is to keep my long, sloping driveway dressed up. But I...

Hi, my B2400 has a noise when moving F or R, it's a kind of a chatter, and worse in high, but seems to be more hydraulic based than mechanical type of chatter. It moves and actually operates okay other than that. I had it to the local Kubota dealer and after a clutch and $1600 later it still...

I have a b2400 with a loader. The spool for the loader is labelled in, out, a,b,c,d and DFP. To me, all self explanatory, except for DFP. There is a line coming out of the DFP position which runs to the rear of the tractor. This line is showing signs of damage, so I'd like to replace it...

Hello, first post here -- hopefully, of many. :) I'm checking to see if I'm getting a steal and what I should specifically look for in terms of checking the whole deal out. I have the opportunity to buy a B2400HST with 1450 hours. It has power steering, FEL and a really heavy duty Atlas gannon...

We loaned our Kubota B2400 out. They lost the key and jumped it with a screwdriver. Now, the key will not start it and if it is started and you insert the key it dies. What did they do to disable the switch? Or can the ignition switch be out?

My B2400 has a problem with either the starter itself or the solenoid. It takes several turns of the key to get it to crank. All the interlocks are working properly, battery is new, connections tight, etc. Apparently, this is a common issue with this model, and I'm wondering if anyone knows an...

Has anyone else had a leaky front axle on a B2400? This was a new design of theirs in 1998 that uses o rings on the front axle pivot point to seal the fluid inside. It always leaks at the pivot despite having been repaired twice already (new o rings twice, pinion seal and new housing last...

I recently bought a used B2400 HST. Runs great and most features work similar to those on my old Yanmar geared tractor. Love the HST and power steering. But the owner's manual is a little skimpy on details & I would sure welcome advice from anyone who has a similar Kubota: (1) My light...

owning-ML-859883-ML- Kubota specific thread. Does anyone read the forum descriptions anymore? :)

I have a Kubota B2400 plagued by a clicking only solenoid. Checking voltage under load at the solenoid yeilded only 6 volts (barely enough but not to really engage it). I went to Auto Zone and got a 3.99 relay putting 12 VDC full thru the relay contact. I drive the relay coil off the wire...

I just purchased a used b2400 w/ loader and have now found out that the pto will not dis-engage. Also the saftey switch has been bypassed so the tractor will start. Any thoughts on how to fix (besides the obvious: why didn't you check this before you purchased offroadfab@yahoo.com ) thanks!

I just purchased a used b2400 w/ loader and have now found out that the pto will not dis-engage. Also the saftey switch has been bypassed so the tractor will start. Any thoughts on how to fix (besides the obvious: why didn't you check this before you purchased offroadfab@yahoo.com ) thanks!

owning-ML-741783-ML- Posted in wrong forum.

I just purchased a used b2400 w/ loader and have now found out that the pto will not dis-engage. Also the saftey switch has been bypassed so the tractor will start. Any thoughts on how to fix (besides the obvious: why didn't you check this before you purchased offroadfab@yahoo.com ) thanks!

owning-ML-741782-ML- Posted in wrong forum.

I just purchased a used b2400 w/ loader and have now found out that the pto will not dis-engage. Also the saftey switch has been bypassed so the tractor will start. Any thoughts on how to fix (besides the obvious: why didn't you check this before you purchased offroadfab@yahoo.com ) thanks!

I am a new tractor owner of 10 months and wish to thank the many contributors to this forum. My learning curve has really advanced plus my confidence, safety and enjoyment are hard to measure. I bought my 2400 used from the local dealer last Nov. and I have put about 160 hrs on the meter for a...

I have a B2400 with 370 hours on it. After bush hogging fields today for a couple of hours I noticed an oil leak - drops comming from the bottom of the rear axle on the right hand side of the tractor looking forward. The oil appears to be leaking when the tractor is running,and it looks like it...

Can anyone tell me how to remove the spring pin from the hand throttle on a kubota B2400? I have the service manual which says to "tap" it out. But the spring pin appears to wedged in too tightly. Do I need a special tool or what? Thanks for any help. Tom

my b2400 , every once in awhile , when i turn the key i just get a click, keep dooing it and it will finally engage, once it is warm seem to be ok and sometimes it won't do it for days. i cleaned all the terminals. but still happens. bad stater? or what?

It appears that one of the oil seals (part 060) on the front spindle (part 010) has grown a leak and needs replacing. The picture from the parts book shows a relatively simple arrangement. It looks to me like removal of the 4 bolts holding the spindle to the axle, will allow the spindle to drop...

Any guesses what one of these might be worth? I don't know much about the tractor except it is a B2400 with FEL and about 400 hours. Don't know the age, it looks like it has been fairly well taken care of, but sits uncovered outside all the time which can't be good for it. I didn't think to...

I have a 1998 B2400 with 860hrs on it and suffering some trouble with the hydraulic system. I changed the fluid,filter and suction screen and it seemed a little better. everything works good when first started but after about half an hour the power steering and endloader start getting weak. I've...

I just got a price on a b2400 hsd 60mmm, FEL, R4tires filled, Curtis enclosed cab with heater, chains and two sets of blades for the mower. Its really pretty clean and has 300 hours on it. I got the guy down to $13500.00. Good deal? fair deal? Or do I go back for more off?

Thanks for the replies to my previous post! I've attached a labeled photo to better depict my problem. Question, is it possible to weld a new bolt to the block and then attach the plate with a nut and lock washer? (Sorry about my terminology - I'm pretty new to the tractor world) My other...

Hi this is my first post on the forum. I am a new (used) B2400 owner with a major problem (see photo). I bought mine used 5 weeks ago and just noticed that one part (where the top left bolt would go) of the "top block" of the 3-point is sheared off. The previous owner (who didn't disclose the...

Hi: Just got a B2400 last weekend. After putting a few hours on it I have found that ocassionally the HST pedal will stick. Sometimes it releases right away, other times it will keep going for several feet the release. It does this in both forward and reverse. It seems more prevelent after...

I need some asssistance. I have found a 3 yr old B2400 (new in 1998)that has 610 hrs on it with a factory loader and backhoe. The B2400 is a 4wheel drive Hydro with bi speed turn. Turf tires on the Front and R4?\'s on the back. Looks in pretty good shape except for a dent in the hood.Is it...

About how much should a 890hr B2400HST with a loader go for? Is 890 hours too high, assuming the tractor has been maintained properly? What would I look for as far as common problems? Thanks.