kubota bx2360

Will a 2005 RCK60B fit a 2360?

I am a newbie to the diesel tractor world. I just bought this tractor last year, and i have noticed the last time i started it the glow plug light would not come on, this was when it was still warm. Anyways i was going to move some snow this morning (its about 28 deg) and when I went to start it...

Hey all, other than the new member post, this is my first official foray into the site. Hope I don't look a fool. I'm in northern Indiana and am looking for a tractor with a mowing deck for my 3 acres. I'd also like a FEL. After narrowing the field to Kubota and JD, I'm leaning toward Kubota...

Well the first big snow of the year is headed here tomorrow (about 12-14") and I am looking for any tips on using the bx2360 and Snowblower. Key notes: - front mount snow blower on bx2360 with Turf Tires - Driveway is very steep with the house at the bottom. - Driveway is about 1/3 asphalt...

Just bought a new BX2360 with FEL MMM, and 4' Rotary. I am waiting as patiently as I can for delivery. They are waiting for a FEL to put on my new tractor. I lurked around here for a few weeks while I was shopping and found all the info I needed to make my decision. I was up in the air between...

I like both drove both but still having a hard time deciding between them... I have both dealers here so support and warranty would be no problem on either. The GC2400 with loader is about $60 cheaper than the BX2360 with loader. MF is doing the 0% for 72 and Kubota is doing the 0% for 60 not...

I test drove a BX2360 today at the Kubota Pensacola, FL dealer... Nice ride... He quoted me $14357 out the door for the BX2360 4x4 and a Loader R4 tires and a 4' bush hog and $237 a month on the 0% for 60 with the Kubota Insurance. Does that sound fair in today's market? Thanks...

I recall seeing a spec that said the 2360 came by default with a 40amp alternator - is that correct? first project on the new bx will be to add some lights. Just waiting for the bx to be available.

Well yesterday morning I woke up and told the wife "Lets go buy the Kubota BX!". Off we went... and we put our money down on a BX2360 w/ FEL and 54" finishing 3pt mower. I was going to buy a used B7800, but it was a lot easier to swallow putting down some money and 0% financing then writing a...

I have just seen a number of bad reviews of the 2350, related to its stability when using the FEL, 1 review said it was unstable on all but flat ground. I was just about to trade my B7610 in on 2360 since i am really scaling back in my yard. My 7610 had the FEL and 60" deck - no filled tires or...

Built the cab over the weekend, let the snow fly. Cab Left side - TractorByNet.com Photo Gallery

Greetings. First post - excellent forums here; I have learned a ton already. I will soon be buying a new Kubota tractor, my first ever tractor, and am hoping to mine some expertise from those who have been through the process. Until a few days ago, my knowledge of tractors was near zero. I...

Is it possible to get an air ride seat for the BX2360?

Reading throught the Kubota literature they made it sound like the BX25 was the only BX that you could use the FEL & MMM simultaneously. Is that true? Can you have them both on the BX2360 at the same time?

Anyone know if it's possible to use an LA 211 FEL on a new BX2360?

A month or so ago I bought a nearly new 2002 BX2200. The tractor is awesome and I soon began looking for a FEL and box blade. I got several quotes from dealers and the FEL and BB were pushing $4k. I happen to be in my local Kubota dealer the other day and found out about the 0% financing...

I have a 10-acre farm, mostly pasture in rotational grazing for dairy-meat goats, some bottle lambs and a Jersey cow-calf unit. For the past 11 years, I have used riding mowers for mowing, cleaning barns (with pitchfork, utility cart), spreading mulch, etc.; however, I'm getting older and need a...

Having just migrated from a riding mower to a CUT, I have a few perfectly good implements I'd like to continue using. A 6" lawn sweeper and a fertilizer spreader. I've tried attaching them to the hitch. Problem is the tongue on the implements are short and the rear tires will interfere during...

guys, as you all know i traded out of bx 50 series tranny jerksville. the bx2360 is a far smoother diesel than the bx1850 i initially purchased. i want to mate a rtr tiller to the bx2360. 3/4 of the property (2 acres), has never been tilled. i'm told it could be a bit rocky, parts of my...

Finally went and sat on a few tractors and at first thought a BX would fit my needs and I'm sure it would, and still may, but really liked the 2320 as well. I do have a few areas that the ground clearance will be suspect and initially will need more of a tractor. However in the long run I...

guys, i only hope i didn't get the "Orange Pearl," the long lost sister ship to the "Black Pearl," of captain jack sparrow fame. my dealer picked up my bx today, before cutting one blade of grass. when i engage the mid pto . . . the deck runs smoothly for a moment and the makes a clanging...

guys, am amazed there wasn't a excessive thunder & lightening, a hurricane or a snow storm today, as . . . our new, year round, property boss was finally delivered (what a long journey!). my dealer picked up my bx1850 and set up a new 60 series, BX2360 w/fel. ten minutes to attach deck, and...

Early last year I researched for a few months and finally decided on the BX2350 because they were being replaced by the BX2360 and the prices were pretty good. Then this recession thing hit and money got tight. Thanks to God, I made it through a reduction at work and things seem to be getting...

I got a price on a brand new BX 2360 with LA243 FEL and 54" MMM for $14,900. Somehow, I feel I could do much better? Comments?

Trading our BX220 for a BX2360. I was considering loading the rear tires....they use windshield washer fluid. I also noticed that there are wheel weights available. I know the windshield fluid wouldn't be as heavy as Calcium...but I don't want the corrosiveness. I like the idea of the...

Dealer priced me a BX 2360 with 60 in belly mower for $9850 new. Think I am going to buy this for my mower. Does this sound like good price?

I'm thinking about upgrading my Legacy to one of these primarily for mowing, and material collection. A snowblower might be part of the picture too, but I have a loader on my larger tractor, and the 3pt hitch capacities are better too. I just think that these subcuts are better bang for the buck...

I'm trying to decide between these tractors. I have a little under 2 acres about half of which I will mow and the other half is wooded with large trees (some of which I may try to establish and maintain as a shaded park/lawn). I have some pretty good slopes on the property so the higher center...

Looking at both. Want FEL, 54"fine cut mulching blade MMM, grill guard, ballast box. Turfs on 1860, R4's on 2360. Can you run the larger 2360 tires on the 1860? Do I need the extra 5HP? Is 18hp enough for the 54" mower and a power bagger? What % are dealers in NE taking off list? cutting 1/2...

Looking at both. Want FEL, 54"fine cut mulching blade MMM, grill guard, ballast box. Turfs on 1860, R4's on 2360. Can you run the larger 2360 tires on the 1860? Do I need the extra 5HP? Is 18hp enough for the 54" mower and a power bagger? What % are dealers in NE taking off list? cutting 1/2...

I posted this in Comparisons forum, but wanted to add it here to see what you Kubota owners think of my 2360 issue below: Hi folks, new member, first post. I hope to pull the trigger on a SCUT pretty soon, been reading and comparing for some time. This week drove a TYM 223, nice tractor, I like...

Maybe this is not news but.. I was in Baltimore on Thursday and saw two crated BX2360's on a flatbed transport. EtW

fellows would any of our dealers who contribute to this forum like to speculate on when we might see the first BX1860's and BX2360's, this fall or next year? thanks, shrekbelly

I know the new BX1850/BX2350/BX24 are just getting to dealers but I was just curious as to what the speculation was about the evolution of Glide Steer... I'm assuming it cost Kubota bit of $$$ to develop it. As far as I can tell they are only selling Glide Steer on the GR2000/GR2100 might it...