mower deck

Hello, own a X730 and having lots of problems keeping the Mower Deck wheels spinning freely, plenty of clearance when the deck is down so not in constant contact (as they should be), they just keep locking-up then dig-in to the lawn. I do keep them lubed with the JD synthetic grease, perhaps...

I have a John Deere D140 with a bagger that I use for the first few mows of the season to prevent all the dandelion seed distribution. I know it's not ideal to mow wet grass, but sometimes that isn't an option, and the grass has to get done (even though it means stopping every few laps and...

I thought I'd share this. I bought some ceramic coating after talking to a young fellow at work. I cleaned my mower deck and applied it underneath. I was amazed the first time mowing! NO stuck grass!!! Absolutely none!!! I've mowed 4 times now and only have a tiny bit the size of a pinky finger...

My departed GR2120 ( bought a new one) had developed the leaking gearbox seal on the mower deck. In looking at it I noted the breather valve had a 5 stamped on it. Removing the valve I noted that is was spring loaded and would require X amount of pressure to open (5lbs?). That coupled with the...

Hello. Just purchased a Bolens H1502 Iseki diesel tractor with a belly mower that wasn’t attached. Tractor has front pto and shafts. Would like to see some pictures or diagrams of how the deck attaches to the tractor and how the cables for lifting are attached if anyone can help me out. Thanks...

I have two that I have owned since new and I no longer have the mowers they work with. One was used with my John Deere GT235 48" deck (chute model 179), the other with a John DeereX300 42" deck (chute model 577). I do not know the Palmor Products model #'s unfortunately. Normal wear and tear...

does anyone have a manual for this in pdf format or even jpg? i have some exploded parts view but the whole pto unit is missing in the diagram - it has the main unit parts listed and not the shaft info included. - my unit is and has been frozen for a few years now due to many surgeries. and it...

Bought a tym t25 about a year ago from a dealer in TN near KY because I heard great things about them. The TYM T25 turned out tobea great tractor but I'm having problems with the mower deck or may be the person who installed everything to do with it. Long story short I need information on how...

I need some help. I have a cub 7193.545-422D100 model. It was running fine, I parked it in the barn and I went to restart after installing the belly mower. Turned the key all the lights came on, turned the key to start and nothing. Allowed the key to go back to on position and not even the...

So I forgot to connect my mid-mount mower deck PTO shaft. I backed up and it bent under the deck, tweaking one ear on the male splined shaft for the U-joint bearings (I think I can bend this back), but it broke the endcaps for the u-joint and I lost some needles. If I could source a new u-joint...

I have an LS MT225S tractor with a belly mower attachment. One of the springs broke that holds the back left side of the mower deck in place. There’s some kind of cotter pin that holds the plate in place for the spring to push against. How does that pin get removed and what size spring do I need?

I am in need of some replacement parts, hit a root while mowing my yard and I can't seem to find them available anywhere. any chance anyone has a lead on these guys?? Part No. 1044R.

I'm about at wits end with this. I recently purchased a kubota bx2660 used with a mower deck attachment and some other attachments. Well I'm trying to attach the deck but can't get the lift linage to line up. I've watched tons of videos and tried everything I've been able to find. It seems...

MASSEY FERGUSON 54" FINISH MOWER DECK MF2320 FOR GC SERIES 1710, 1720, 1723 & 1725. I bought this new with my tractor in 2019, but soon realized the tractor is too heavy for my yard, so it's been sitting in my garage for the last 4 years. I only used it 5 or 6 times before accepting that I...

doing my pre-season service notice I am missing one 4260289M1 (agco part number) clip. look like this been unable to find xover number to other brands.

My Woods RM600 (unknown vintage) has worked well for the 4 years I've owned it. Powered by a 1947 Ford 8n early model (front distributor), which runs great. I just prepped it for the mowing season with new blades, greased all zirks, tore down and lubed all casters and axels, and cleaned it top...

Hey Folks, I am need the gauge wheel bracket that goes on my Kubota BX 60" mower deck. I can't find a replacement anywhere. Any ideas on how might I get one. I don't have access to a weilder to be able to make one. HELP

Removing/Reinstalling a Roll Pin. I have a B3000 with a RCK60-30B(A) belly mower. The lift linkage portion that hooks to the deck to raise and lower it, has a Roll Pin that looks to be broken in 1/2. Items in Parts Diagram for the CK60-30BA are Part #290 (Pin Spring) #75599-52532, AND Part...

I've always taken my MMM off in late fall prior to putting on front blade for plowing. The 72 inch deck is a monster to move around and store. So I was thinking of just pinning it up and leaving it on for the winter while plowing. Has anyone else done that? I not sure what harm it can do...

Selling this Cub Cadet 1512 diesel garden tractor. Kubota D600 three cylinder diesel engine, hydrostatic transmission, single spool hyd lift, mower deck. Will not come with different bar tires and no wheel weights. Needs fuel lines from tank to engine and return line back to tank. Does run...

Hello, I have a mid mount mower deck on my TC33D. I plan to use a blade with the tractor. Clearly since the mid mount raises via the 3pt lift arms I need to remove the mower deck so it does not go down with the blade. To remove the 914A mower deck pins can be pulled and the link arms can be...

I'm new to this forum and had a question about mower deck compatibility. I have a Kubota B1750 with an RC54-B mower deck attachment, which has been repaired twice in the past year. It has become hard to find parts for it and recently on a local posting site an RCK54-22BX was available for $400...