regulator

  1. G

    L4200-GST Bad Instrument Cluster Voltage Regulator

    Both the fuel gauge and the water temperature gauge on my 1997 L4200-GST have been flaky for a long time. I'm pretty sure the problem is the instrument cluster voltage regulator, which is apparently a built-in component of the instrument panel. A new instrument panel would be extremely...
  2. P

    Foton FT404 Voltage regulator failure

    One day when using my 2007 Foton I noticed that the battery charge lamp failed to go out. When back in my shed I grabbed a multimeter and sure enough the battery voltage stayed at around 12V and didn’t climb up to 13.8V as I would normally expect. What to do? The electrical circuit diagram...
  3. Code54

    Propane generator regulator questions

    I have a 8 year old 20 KW Briggs whole home generator with a Vanguard 993 motor, and we have been having some issues with it starting. It will start, but it either takes a rather long crank or 2 tries. You can also get a whiff of propane while it tries to start. We narrowed it down to needing...
  4. B

    B2410 voltage regulator

    Hello everyone. What should the voltage output be of the voltage regulator on a b2410? I have been having a battery issue and and I’m only getting 12.37 volts with tractor running. Thanks.
  5. R

    Voltage regulator

    Where is the voltage regulator on a F20d. Diagram show one but i dont see one
  6. B

    Should voltage regulator have continuity to its housing?

    My Cub Cadet SLT 1550 is blowing the 20A fuse as soon as it is inserted, even with key off and ignition switch unplugged from the back. It reads 12v DC at all times across the fuse box. The red/white striped wire that leads from the fuse box to the DC alternator has continuity to the frame of...
  7. Dunk19

    Voltage regulator

    I am looking for a voltage regulator that is compatible for a 1999 New Holland TC 18 tractor. NH wants $330 for the regulator. Is there something compatible for less. I have seen in other forms a J5050 from EBAY motors. Any help would be greatly appreciated
  8. Skylap

    Oil regulator/Oil relief valve

    Hello, I have a Shibaura SD1840 (LET802C). The other day while driving, all of a sudden the oil dip stick blew out. Obviously there is a high oil pressure in the engine carter. After searching the Internet I suspect that the oil relief valve could be the problem. However I have no clue where to...
  9. E

    Satoh Beaver S373-D 4-wheel drive

    My Beaver is a S373-D, 3-cyl, 4-wheel drive selectable version from late 70's. Had some wiring smoke and burns this winter and finally got parts to fix it. Color and age on a few wires not readable since it has been painted over. Many connectors were broken and a few wires burned and insulation...
Top