skidsteer

Hi Guys! My name is Jon, this is my first time posting on here. For the last couple of months I have been working on my chassis and loader for my little homeade wheeled mini skid project. Its coming along pretty good, and now its time to start ordering hydraulic components. This is where I am...

I have a new Reist RR84 Roto-Rake and I can only get high flow in forward direction only. Is this normal? My skidsteer is a Takeuchi TL12 r2 high flow which is near new

I have a 763 Skidsteer and 1 side of the Bob Tach plate is out of round. I have a new bushing for it, usually that just sits in there and holds the pins that attach to the loader arms. My question is should I weld the new bushing in place to keep if from moving around? Any other ideas? I...

Newbie. No service manual. Left lift cylinder started squirting oil after lifting loader bucket full height. Purchased seal kit from dealer to rebuild cylinder. Removed gland nut and rod from cylinder barrel. 1.5" socket, 1" drive 40" breaker bar with 36" steel pipe extension was able to break...

Be gentle, this is my first time plowing with my tractor as well as my first time with a fullsize plow. All noob jokes are expected. :) I have an L3560HTC that I've added a 7-foot quick-attach plow to. She looks like this: Yesterday was the first snow and I attempted to use the FEL's "float"...

Hey guys, it has been a while since I've introduced some new Wickedness to TBN. This product has literally been in development for over four years, and we're now 100% confident that she's ready for whatever. After making and testing many prototypes which were as good as the competition, but...

Finally posting some pics. Sold the old single lid root grapple and fabbed up this twin lid lightweight one more suited to handling logs, firewood, roots, rocks, brush etc. Specs: * AR400 laser cut profiles * 66.5" width, 31" deep bottom, 40" grapple max opening, can hold 20" log when grapple...

Good morning! Is there an adapter out there on the market to connect to the Branson quick connect that would convert to the skidsteer quick attach or do I need to weld it up. I was hoping for something similar to this JD adapter.

EDIT: The check valve was in backwards, its running forward now but while switching it around I noticed that the anvil was about to fall out, apparently need to check every nut and bolt on auction machines. I bought a "2023 SUIHE SSW-C Skid Steer Chipper" from Ritchey Brothers auctions. The...

I have the original JD 260 skid steerer which does not have high flow. Is there a way modify it so that it has high flow capability? Perhaps a conversion kit. I thas been a great machine but only having low flow has been a limiting factor. Any advice appreciated. Peter

I have a 2008 Toolcat 5600 that wont move. When I lower the arm it brings the hydraulics alive and allows me to operate the arm but it wont go into gear, forward or reverse. I've read somewhere that people have had these same issues but I have not found a solution to my problem yet. It did...