Branson BL20 Quick Connect Bucket to Skidsteer Adapter
- Thread starter Zork
- Start date
Xfaxman
Super Star Member
- Joined
- Feb 8, 2013
- Messages
- 12,923
- Location
- Guthrie, OK
- Tractor
- Toolcat 5610 G - Bobcat V417 - TORO+Loader
Need a picture of your Branson "quick connect".
Do you mean the "quick attach" on the front?
Do you mean the "quick attach" on the front?
2manyrocks
Super Member
- Joined
- Jul 28, 2007
- Messages
- 7,332
BL20 quick attach type???
So I was told that Branson is global/euro FEL quick attach. So I ordered a set of pallet forks for global euro, not even close to fitting. Does Branson use their own type of quick attach? I need to buy an adaptor to go to global/euro, and if I cant then Ill fabricate one. Its a 2005 4720 with...
www.tractorbynet.com
OP
Zork
Platinum Member
- Joined
- Dec 14, 2003
- Messages
- 976
- Location
- Virginia
- Tractor
- '04 Branson 3520, '51 Fergy, '96 MTD 18/46, '02 Craftsman GT5000/48
My post has a screenshot of the global euro and it is not close [to mine].BL20 quick attach type???
So I was told that Branson is global/euro FEL quick attach. So I ordered a set of pallet forks for global euro, not even close to fitting. Does Branson use their own type of quick attach? I need to buy an adaptor to go to global/euro, and if I cant then Ill fabricate one. Its a 2005 4720 with...
Attachments
Last edited:
OP
Zork
Platinum Member
- Joined
- Dec 14, 2003
- Messages
- 976
- Location
- Virginia
- Tractor
- '04 Branson 3520, '51 Fergy, '96 MTD 18/46, '02 Craftsman GT5000/48
Yes. The blanks look similar to the John deere 304's (I have not verified the demensions) that are selling for $900.
[Edit: so I need to find a skidsteer adaptor with the similar jd304 blanks, or make it myself and weld the skidsteer adaptors to them. I know Branson has the skidsteer assembly, but then i would need to modify my bucket.]
Attachments
Last edited:
OP
Zork
Platinum Member
- Joined
- Dec 14, 2003
- Messages
- 976
- Location
- Virginia
- Tractor
- '04 Branson 3520, '51 Fergy, '96 MTD 18/46, '02 Craftsman GT5000/48
Thanks, mine is the SMS5 [edit: that looks similar to the jd304 blanks in my post.] The Euro is the adapter assembly in my post and it clearly doesn't fit due to the offset hooks/eyelets.
Last edited:
Xfaxman
Super Star Member
- Joined
- Feb 8, 2013
- Messages
- 12,923
- Location
- Guthrie, OK
- Tractor
- Toolcat 5610 G - Bobcat V417 - TORO+Loader
OP
Zork
Platinum Member
- Joined
- Dec 14, 2003
- Messages
- 976
- Location
- Virginia
- Tractor
- '04 Branson 3520, '51 Fergy, '96 MTD 18/46, '02 Craftsman GT5000/48
Thanks, the closest one to mine is the Kubota 1251. They don't post specs on it other than 5k rated. There are some other inexpensive hopefuls
. The Euro could be cut to bring in line and the trima sms5 may work, but only available from Europe. If not these, I'm thinking of welding clevis mounts, idk, I must take some measurements.
www.agri-linc.com
. The Euro could be cut to bring in line and the trima sms5 may work, but only available from Europe. If not these, I'm thinking of welding clevis mounts, idk, I must take some measurements.
Trima / SMS / No.5 Loader Brackets (Pair) - Agri-Linc
Proforge Trima / SMS / No.5 Weld On Loader Brackets. Size A = 320mm, B=38mmTo suit Trima / SMS / No.5 and McConnell loaders
www.agri-linc.com
Attachments
OP
Zork
Platinum Member
- Joined
- Dec 14, 2003
- Messages
- 976
- Location
- Virginia
- Tractor
- '04 Branson 3520, '51 Fergy, '96 MTD 18/46, '02 Craftsman GT5000/48
My Ansung adapter may take a different Euro as an option, all I would need is an 8 or 9 inch lower pin x 1". The Euro adaptor i posted appears to be reversed, so it will not work on mine, wamp, wamp, wamp....My top bar is 1.5 inches in diameter and I have plenty of room side to side.
Attachments
Last edited: