toolcat

  1. T

    2005 Toolcat 5600b solenoid wires pulled loose

    Under passenger side, 4 wires were pulled loose from solenoid connectors. Does anyone know which wire goes where in the connectors? Also, would this cause all hydraulics to not work ?
  2. G

    Fender lights 2006 Toolcat 5600

    My Fender lights on my 2006 toolcat do not work. I have tested the bulbs and they do work off another 12v source. All fuses in the passenger side fuse panel are intact and working. All other lights are working. Is there another fuse that is buried somewhere that is missing? Switch still...
  3. V

    Toolcat Vin search

    Good day, I have an older toolcat and having trouble locating the vin plate. I am told by bobcat that its located on the front of the unit there the lift arm attaches. I seen a post that mentions under the lift arm. I have not been able to find it. Any ideas please. Also, I am looking to...
  4. laurencen

    snow date with the Toolcat

    well until last week we have been blessed with unusual warm weather and no snow, today was the second snowstorm in a week, 8 inches fell today 6 inches previous, the wife finds it amusing I clear snow in shorts but the heater is top notch, after doing our yard and driveway of half mile went down...
  5. S

    2020 toolcat 5610 does not want to move smoothly in low

    I changed the front fluid and cleaned the speed sensor, checked the wires (no breaks). If I take the traction control off in low it moves fine as in high also. When I try to push it in low or high I get an error code of 50-89. Is it possible the speed sensor could be bad?
  6. S

    Toolcat 5600

    Have a 2004 Toolcat 5600 and am looking for some rigid hydraulic hosws, hydraulic body valve and a solenoid. Any ideas where to find replacement parts ?
  7. laurencen

    Toolcat running rough cut mower

    this is the first time mounting the rough cut mower on my Toolcat, the guy cutting hay in my field will not cut where we have Canada thistle so have to cut it down. first off this rough cut mower is not a brand name, has the bar where the blades mount instead of the disc, the mower spins fine...
  8. L

    Toolcat drive issues

    2023 UW56. When traction control is on it spins the right rear wheel in relation to the other wheels and has trouble driving. When I turn off traction control the toolcat won't move at all or will barely move. Out of warranty. Any help much appreciated.
  9. T

    Toolcat 5600 Hindged Window Replacement?

    Got a little too friendly with a tree and unfortunately broke the back, smaller piece of glass on the hinge side that opens. Bobcat only shows a replacement for the entire fricking thing for near $600 which us crazy! Part #7103606 — There doesn't seem to be a logical reason why they wouldn't...
  10. D

    Airless toolcat tires

    Does anyone know of any airless tire options for a 2020 tool cat? Looking at the skid loader options I can't seem to track anything down. Is it possible there is an adapter kit?
  11. K

    Headache rack for Toolcat

    Does anyone know where to find a ha rack for the Toolcat’s?
  12. AdmiralS

    ToolCat Step Kit

    Question - The Step Kit that you can buy for the ToolCat Can that be mounted on both sides of the machine? https://shop.bobcat.com/step-kit-7135575 Don't even get me started on how much they charge for it....
  13. liamcward

    LED Light Upgrade

    Hey Guys - Decided to make use of this no snow time to finally go ahead with upgrading to some of the lights to LED kits. I had some burnt bulbs and a damaged housing already and found some pretty good Black Friday deals down at Princess Auto. I ended up going with a light bar across the front...
  14. TYM 474 Owner

    Considering selling compact tractor for toolcat

    Hello All I have been reading through this forum and have found it to be insightful, however I would still like some community input as I am pondering selling my 48hp compact tractor for a toolcat (used). I don't have a lot of acreage to manage and primarily use my compact tractor to manage...
  15. P

    2009 Toolcat Help. Is it a good price?

    I recently came upon a 2009 toolcat 5600 that the owner is looking to sell. It has a new bed, but the cab is pretty rusted out. There is some broken plastic, lights, and other minor things. It has 5800 hours and the owner says that it runs great other than needing a turbo. It would come with no...
  16. D

    Toolcat Snowblower trouble

    Good afternoon all, I have 2006 toolcat and a 2014 SB200 snowblower. I am able to get the main augaur to turn, but am unable to get the chute to move left or right, not adjust the pitch. Any quick recommendations? Thanks in advance!
  17. Andy Grondahl

    Bobcat Toolcat 5600

    I have a 2008 Toolcat 5600 that wont move. When I lower the arm it brings the hydraulics alive and allows me to operate the arm but it wont go into gear, forward or reverse. I've read somewhere that people have had these same issues but I have not found a solution to my problem yet. It did...
Top