13.6-16 turf tire chains

[90cummins]

I made up a set of chains for the 13.6-16 turfs on my tractor using (used) cross links from semi truck tires.
They will not stay on the tire because they are too short (15 inches) I need to add at least 4 inches to them so they go over the tread and further down the sidewall.
New chains are 4~$600.
Is there an improvised cost effective solution out there?
I can break them down easily enough but have not found suitable links to insert.
Any suggestions?

Thanks 90cummins

 

[LouNY]

Here is one place;
https://wescovan.com/traction-tire-chains/tire-chain-parts

And here;
Parts and Accessories - Page 1 - TireChain.com

You have quite a project ahead of you.
The last set I built from used stuff I ended up torch cutting and welding links in rather then buying all the repair links to join them all.
Also don't short yourself in the length of the cross chains the further down the sidewalls the better the chains stay on.
Good luck.

 

[90cummins]

Thank you for the links exactly what I was looking for.

��
90cummins