1428V

   / 1428V #1  

ChrisJ

Member
Joined
Apr 13, 2004
Messages
38
Location
New Hampshire
Tractor
MF 1428v, gear
Here's the new toy, just figured out how to do pictures so I figured I'd attach the ones that will work. 1428V, gear, 1464 FEL, land pride 60" rfm, 60" york rake.
 

Attachments

  • 420426-Dsc00585.jpg
    420426-Dsc00585.jpg
    60.7 KB · Views: 838
   / 1428V
  • Thread Starter
#2  
Here's another shot.
 

Attachments

  • 420427-Dsc00586.jpg
    420427-Dsc00586.jpg
    60.5 KB · Views: 654
   / 1428V #3  
Congratulations. /forums/images/graemlins/cool.gif have fun...
 
   / 1428V #4  
Wow--that's beautiful! I haven't had much time to stay current with the posts lately and now I see this. You're starting to make me jealous. I've been quite happy with my GC2300 so far, but every once in a while, I wish I had something just a bit bigger. I know, I know...shoulda done it the first time, but most of the time the small size is actually an advantage.

Anyway, I digress. Enjoy that tractor and make good use of all those implements! I'll be watching to hear (and see) your adventures.
 
   / 1428V #5  
Wow! Looks like a really wide open deck.
Should be a breeze to get on and off.

Anthony
 
   / 1428V #6  
Chris,
Really a nice rig. Looks "brand new". After reading your previous post about your 3ph arms hitting the PTO shield...
"I noiced that when nothing is attached to the 3pt that if I raise it the lower arms of the hitch get caught on the PTO shield.", I looked at a new one at my dealer's lot. I couldn't see any potential problem the way it was set up. Hope you resolved that situation???
I couldn't tell from the pictures if you have a toothbar on the bucket? It makes a world of difference if you're going to need to dig or grub out brush. Enjoy the tractor.
 
   / 1428V
  • Thread Starter
#7  
Yes, I did some adjusting and it seems to be working. In the pictures it's my Modern Implement 60" york rake attached. I am going to put the Land Pride mower on after work and try it out for the first time. I started it up before the grass had grown, it sounded really powerful. I'm used to the midmount mower from my old garden tractor, that was nothing compared to the rfm.
 
   / 1428V #8  
Chrisj, Very nice ,you'll be tearing stuff up in no time /forums/images/graemlins/grin.gif
you were right in previous posts looks new,good deal ,enjoy...
SWEET /forums/images/graemlins/wink.gif
 
   / 1428V #9  
ChrisJ,

Nice looking tractor and welcome to Club 1428v!

28Red /forums/images/graemlins/cool.gif
 

Tractor & Equipment Auctions

1984 NAVISTAR 1954 CABLE HOIST (A51222)
1984 NAVISTAR 1954...
2019 RBR Venturi 380 (A51039)
2019 RBR Venturi...
2018 Nissan Pathfinder SUV (A50324)
2018 Nissan...
(2) ROLLS OF HD CHAIN LINK MESH WIRE (A50460)
(2) ROLLS OF HD...
BW RVB3405 20,000lbs 5th Wheel Hitch Base (A50322)
BW RVB3405...
2015 VOLVO VNL TANDEM AXLE SLEEPER (A51219)
2015 VOLVO VNL...
 
Top