1600 Turbo Stalls when trying to move

[Doug5790]

Just bought a 1600 Turbo II WAM. It starts and runs great. When you step on F or R extremely lightly at idle, it will move at about 2 feet per minute forward or reverse. Try and give it a little more juice?.....shuts off. Must try twice to restart.....first try feels like no fuel. Second fires right up. Then same deal. Try to move....? dies on any foot pressure. Wrench fault code is 1 flash then 4 if that helps. any ideas? xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

 

[dodge man]

Most likely a safety switch. I’d start with the seat safety switch.

 

[beenthere]

Agree, sounds like a safety switch and "welcome" to TBN