1601 Throttle

   / 1601 Throttle #1  

turboblue46

New member
Joined
Jan 1, 2005
Messages
10
I have a problem with my hand throttle. I pull it back to the engine speed that I want. But just soon as I let go of it. It creeps back down to a slow idle. It doesn't die but it comes close sometimes. Is there a adjustment on this thing somewhere to stop this. Thanks Mike
 
   / 1601 Throttle #2  
Yes there is an adjustment, where it comes out the side.
First pull off the cover in front of the shifter off,the one below the key.
Then look inside the dash, on the right hand side you will see where the lever comes thru, I think it takes a 17mm or ??
just tighten it up a bit, not a lot or it wont move,and squirt some oil on it.
Replace the cover & enjoy !
Ernie
 
   / 1601 Throttle
  • Thread Starter
#3  
Thanks for the information Ernie.
 

Tractor & Equipment Auctions

2020 MACK PINNACLE (A50854)
2020 MACK PINNACLE...
2023 TAKEUCHI TL10V2 SKID STEER (A51242)
2023 TAKEUCHI...
1995 Olympian Generac 94A06155-S Generator (A49461)
1995 Olympian...
2013 Acura ILX Sedan (A50324)
2013 Acura ILX...
2003 Big Tex 10PI 16ft. T/A Pipe Top Utility Trailer (A49461)
2003 Big Tex 10PI...
2015 Isuzu NRR John Bean 700 Sewer Jetter Vacuum Truck (A49461)
2015 Isuzu NRR...
 
Top