cowma72
New member
I have a4000 diesel row crop my 3point works but the pto will not engage I think its 1975 3 cyd
1963 ford 4000 - pto will not engage
- Thread starter fowler6416
- Start date
- Views: 24081
-
- Tags
- ford 4000
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
welcome to TBN. you have tagged onto some 2+ year old post, and your message will likely never bee seen. You'd be much better off to start your very own post, and in the correct section. Not the hyds section.
Try the ford section.
Now, on this rowcrop. is it a 3 cyl or 4 cyl. and what transmission type does it have.
If it is a 3 cyl, post the model id number from the bellhousing flat, aft of the starter so we can see what your pto options are. If a 3 cyl, this will be a flat deck job.
Try the ford section.
Now, on this rowcrop. is it a 3 cyl or 4 cyl. and what transmission type does it have.
If it is a 3 cyl, post the model id number from the bellhousing flat, aft of the starter so we can see what your pto options are. If a 3 cyl, this will be a flat deck job.
