1st Time Tractor Owner

   / 1st Time Tractor Owner #11  
For me, 100mi is WAY too far. As a tractor virgin you need some support closer by. Unless you need to run a 10ft brush hog or something similar I could not find any reason to upgrade from the MX4800 to the MX5200.
 
   / 1st Time Tractor Owner #12  
Sounds to me that something in the size range of the kioti CK 30 would be a good fit see if they have one when you check them out. As far as the hydro trans goes I am a big fan. I find it better for most of my uses. I think gear has some advantages when you're doing a lot of ground engagement like plowing or disking or maybe pulling a very large trees out of the woods. But the Hydro will work for those tasks also and I find it very user-friendly and great for loader work.
 
   / 1st Time Tractor Owner #13  
This may be the first time we've suggested going with a smaller machine. :laughing: 6 acres isn't very much. A tractor in the mid 20's to mid 30's HP will be more than enough. And if you go much larger you are going to want a separate mower. I have 4 acres and my 24HP JD 2320 is almost overkill (but I would never admit that to my wife). Once in a while you may run into something that would be a lot easier with the big HP tractor, but most of the time you will be glad you have a smaller more flexible machine.


I agree with Kenny,^^^^

A little less tractor and more money for attachments would be a better blend. This assumes the tractor is for home/consumer use on your property.

Moving 300 yards with a box blade is not a big deal you can do this with a 35 hp tractor easily.
 
   / 1st Time Tractor Owner #14  
Last edited:
   / 1st Time Tractor Owner #15  
I agree with Kenny,^^^^

A little less tractor and more money for attachments would be a better blend. This assumes the tractor is for home/consumer use on your property.

Moving 300 yards with a box blade is not a big deal you can do this with a 35 hp tractor easily.

Me too. 50HP is to big.
 

Tractor & Equipment Auctions

Weld on excavator thumb EK1212 (A56435)
Weld on excavator...
UNUSED FUTURE 16" HYD AUGER (A52706)
UNUSED FUTURE 16"...
2015 Ford F-550 Stellar 7621 7,500LB 3 Ton Crane Service Truck (A56858)
2015 Ford F-550...
2009 Honda Odyssey Van (A55758)
2009 Honda Odyssey...
New Wolverine 3Pt hitch Receiver (A59000)
New Wolverine 3Pt...
Tool King 12-Ton Hydraulic Pipe Bender (A59076)
Tool King 12-Ton...
 
Top