Diamondpilot
Super Star Member
- Joined
- Jan 18, 2007
- Messages
- 16,331
- Location
- Daleville, IN
- Tractor
- Jinma 254/284 Ford 861 Powermaster at work
Glad you got it up and running again.
Chris
Chris
2002 F250 Diesel Problem...Hurry!!
- Thread starter hunterridgefarm
- Start date
- Views: 3359
wushaw
Elite Member
Which fuse?
DANOCHEESE
Gold Member
Very common issue. I have a 01 and if you turn the OD off then back on it will pop the fuse everytime. I really need to put a little tape around the wire.You need to pull the ignition and then the colum covers will come off. There is a great write-up over on TTT.Thedieselstop.com
schmism
Super Member
that would have been my first question. sounded like it was a fuse problem to start with. put fuse in, blows, put second fuse in, blows.... = problem with wireing
OP
hunterridgefarm
Veteran Member
- Joined
- Jul 12, 2005
- Messages
- 2,131
- Location
- Western NC
- Tractor
- Kubota L3130DT, Kubota L185DT, JD LX277
They said it was #42 but I did some checking when I got the truck home and I believe you were right that it was #41.
wushaw
Elite Member
I know you said you checked all the fuses and sometimes it's hard to tell if it's poped or not so I use a 12v test light to check fuses, it's faster and tells if you got pwr or not on both sides.
I had the same problem with my truck and I got news from a friend that worked for ford before the recall was issued and I ended up replacing the CPS and the problem was fixed. I haven't had any fuse problems as of yet.....Knock on wood!!! Love the truck though!