2008 John Deere 110 TLB "In Calibration Mode" need help

[ajallen350]

Has anyone on here calibrated the hydro stat transmission controller "HST" on a 110 tlb before?

I had some issues with mine and thought I was ready to calibrate the sensors so I put the fuse 11 in fuse 12 slot and start the automatic calibration. I get to . . - - "forward threshold coil" when I press the forward pedal I get no output from controller.

Before I spend $900 for a controller I wanted to see if someone has completed this calibration before, maybe I'm doing something wrong or not in order something. I've checked all sensors, they calibrate just no output to forward coil, it just sits there.

Thanks

 

[ajallen350]

Anyone completed the automatic hst calibration on a 110 tlb?:shocked:

 

[ajallen350]

Controller was bad, after new controller and a calibration all was good.

 

[Ktbetz]

Thanks for posting to complete the thread. I'm not there yet but it's good to know what others have experienced.