Texasmark
Elite Member
- Joined
- Apr 24, 2012
- Messages
- 3,694
- Location
- N. Texas
- Tractor
- Ford: '88 3910 Series II, '80 3600, '65 3000; '07 6530C Branson with FEL, 2020 LS MT225S. Case-IH 395 and 895 with cab. All Diesels
Neighbor has one and also has an owner's manual specifically for that combo and smaller engines in the cab, hydrostatic 15 series. The Owner's manual shows two black lettered, white background digital monitors for functions but his tractor has an analog, black background tach right in the center of the display rather than two white digital side by side. Only white background indicator is on the right side and is for fuel level. Red lights are provided for oil pressure and battery condition plus a glow plug indicator on the left side.
Problem is that there is no engine temp indication on the dash. Is this dash maybe for a non cab version, or a non hydro version? Possibly there is an indicator in the dash display but the wire to operate it isn't connected.
Clarification appreciated.
Problem is that there is no engine temp indication on the dash. Is this dash maybe for a non cab version, or a non hydro version? Possibly there is an indicator in the dash display but the wire to operate it isn't connected.
Clarification appreciated.