2022 Mahindra 2638

[Mark Hensley]

I just purchased a Mahindra 2638. I was curious if anyone knows how many grease zerks(fittings)are on the tractor excluding the FEL. The manual shows five; however, I thought there would be more.

 

[Birdhunter1]

2 above the front axle on the pivot bushing, 1 on each tie rod, 6 on each side of the loader, 2 or 3 under the floor on the right in the area of the hydro pedals, i think there may be one under the left side of the floor (I can't remember).

 

[Mark Hensley]

2 above the front axle on the pivot bushing, 1 on each tie rod, 6 on each side of the loader, 2 or 3 under the floor on the right in the area of the hydro pedals, i think there may be one under the left side of the floor (I can't remember).

Thank you.

 

[duffer]

Do yourself a huge favor if you haven't already. Pick up a battery powered grease gun. Dewalt & Milwaukee are both good.
Makes greasing "almost" fun.

 

[RjCorazza]

Do yourself a huge favor if you haven't already. Pick up a battery powered grease gun. Dewalt & Milwaukee are both good.
Makes greasing "almost" fun.

X2 on the electric grease gun. Couple it with a LockNLube tip.
My ZD mowers have 20 grease fittings that I hit every 30 hours or so. While I can't say it's fun, it is a whole lot faster and easier.