2210 question

   / 2210 question #1  

JimD

Bronze Member
Joined
May 9, 2002
Messages
57
Location
S.E. Michigan
Tractor
2210 JD
I need some help from my fellow 2210 owners. Can anyone tell me how many seconds it takes for you to lift the FEL bucket from level ground to full up position? I think mine is running a little slow, from when it was delivered. /forums/images/graemlins/confused.gif
 
   / 2210 question #2  
I have a 2210. The lift speed is real sensitive to RPMS's anything less than 3000 will slow it right down. Thing almost seems to creep at slow idle.
 
   / 2210 question
  • Thread Starter
#3  
I'm not sure about the RPM's I will try that tonight. But, the manual for the 210 loader stated that the lift speed should be 3.8 seconds. I'm about twice that at idle speed... I am really interested in what someone else gets when they time it..
 
   / 2210 question
  • Thread Starter
#4  
I though I should post the cause of my loader problem. Just incase anyone else comes up with the same symptoms.
The reason my loader was moving so slow is because there was a small chunk of rubber hose caught in the male coupling. I removed the chunk of rubber and presto loader meets the cycle time 3.8 sec..
 

Tractor & Equipment Auctions

John Deere Quick Attach Bale Spear (A50514)
John Deere Quick...
1997 HUBBLER BROS. LOGGING TRAILER (A50854)
1997 HUBBLER BROS...
Ford Super Duty 8ft. Truck Bed (A49346)
Ford Super Duty...
2012 MACK PINNACLE CH613 FLAT TOP DAY CAB ROAD TRACTOR (A51243)
2012 MACK PINNACLE...
80in HD Tooth Bucket with Side Cutters ONE PER LOT (A51039)
80in HD Tooth...
2016 Big Tex 14ft. T/A Hydraulic Dump Trailer (A50322)
2016 Big Tex 14ft...
 
Top