2210 question

   / 2210 question #1  

JimD

Bronze Member
Joined
May 9, 2002
Messages
57
Location
S.E. Michigan
Tractor
2210 JD
I need some help from my fellow 2210 owners. Can anyone tell me how many seconds it takes for you to lift the FEL bucket from level ground to full up position? I think mine is running a little slow, from when it was delivered. /forums/images/graemlins/confused.gif
 
   / 2210 question #2  
I have a 2210. The lift speed is real sensitive to RPMS's anything less than 3000 will slow it right down. Thing almost seems to creep at slow idle.
 
   / 2210 question
  • Thread Starter
#3  
I'm not sure about the RPM's I will try that tonight. But, the manual for the 210 loader stated that the lift speed should be 3.8 seconds. I'm about twice that at idle speed... I am really interested in what someone else gets when they time it..
 
   / 2210 question
  • Thread Starter
#4  
I though I should post the cause of my loader problem. Just incase anyone else comes up with the same symptoms.
The reason my loader was moving so slow is because there was a small chunk of rubber hose caught in the male coupling. I removed the chunk of rubber and presto loader meets the cycle time 3.8 sec..
 

Tractor & Equipment Auctions

2017 Ground Hog HD99 Towable Hydraulic Auger (A49461)
2017 Ground Hog...
2015 FREIGHTLINER CASCADIA TANDEM AXLE DAY CAB (A51219)
2015 FREIGHTLINER...
1968 CHEVROLET C10 1/2 TON PICKUP TRUCK (A51222)
1968 CHEVROLET C10...
John Deere 946 Center Pivot Rotary Mower-Conditioner (A51039)
John Deere 946...
CFG MH12RX Mini Excavator (A49461)
CFG MH12RX Mini...
2025 LandHonor LHR-DFP10 Diesel Fuel Transfer Pump with Hose Reel (A49461)
2025 LandHonor...
 
Top