2305 handle a 5ft Brushhog?

   / 2305 handle a 5ft Brushhog? #1  

wagonguy

Bronze Member
Joined
Mar 6, 2009
Messages
80
Location
western pa
Tractor
JD 2305
Is 5' brushhog too much or can ths 2305 run it OK? no hills ,(so far) just wonder about weight and lift?
 
   / 2305 handle a 5ft Brushhog? #3  
All bush hogs weigh different.
Will it lift the weight...probabally.
Does it have enough pto HP to use it....Probabally.
Will it be hard to steer without front weights or a loader...definatally.
Would I do it...NO. Id just get a 4' made for the tractor.
 
   / 2305 handle a 5ft Brushhog? #4  
John Deere does not offer a 5 ft for 2305. I would go with
either the Frontier 4 ft or the King Kutter XB designed for SCUTs.
 
   / 2305 handle a 5ft Brushhog? #5  
I run a 5ft. bush hog on my 2305 just fine. I have the loader on the front though. It works just fine but it's quite a load on the tractor to lift and run. Get a 4ft if you care about your tractor.
 
   / 2305 handle a 5ft Brushhog? #6  
I run a 5ft. bush hog on my 2305 just fine. I have the loader on the front though. It works just fine but it's quite a load on the tractor to lift and run. Get a 4ft if you care about your tractor.
So then why are you running a 5 footer?
 

Tractor & Equipment Auctions

2003 Buick Century (A55758)
2003 Buick Century...
2016 Sakai SV540 Padfoot Compact Roller (A54865)
2016 Sakai SV540...
2012 Ford Escape Limited SUV (A55758)
2012 Ford Escape...
2024 CATERPILLAR 255 SKID STEER (A52705)
2024 CATERPILLAR...
2020 MDB UT125KPLUS FLAIL MOWER (A51406)
2020 MDB...
2009 Lexus RX 350 SUV (A53424)
2009 Lexus RX 350...
 
Top