I am just curious where the info and the pic (listed at the beginning of this Post) came from. If it's Top-Secret, I understand; and I'm glad you posted it. I was wondering if there's an internet address out there with this info., or is this classified stuff someone's leaked from JD? Seems like if we have this much info., we could find out exact dimensions such as lenght, width, height and weight.... ????PLEASE....somebody.....
2320 Update
- Thread starter johndeere_2210
- Start date
- Views: 4609
bglombowski
Member
Hey all,
I got a little more info on the 2320 today from the local dealer. He had a brochure, but couldn't let me keep it, so he made a copy of the spec page. It contains info on both the 2320 and the 2520. Here's a few numbers:
Hydraulics
Steering 2.2gpm (2320) 5.5gpm (2520)
Implement 3.4gpm (2320) 5.0gpm (2520)
Total 5.6gpm (2320) 10.5gpm(2520)
BTW, the 2305 is 5.2gpm total
Lift capacity(24in behind link arms) 1,150lbs (2320 & 2520 are the same)
Weight 1,660lbs (2320) 1,865lbs (2520)
The copied page also has a few measurements. The hood height shows 53.3" (2320) and 47.2" (2520) but I think those numbers should be reversed. Folded ROPS height is 67.9" (2320) and 68.9" (2520). Sorry, the length wasn't copied.
The dealer couldn't give a price yet.
Later,
Brian
I got a little more info on the 2320 today from the local dealer. He had a brochure, but couldn't let me keep it, so he made a copy of the spec page. It contains info on both the 2320 and the 2520. Here's a few numbers:
Hydraulics
Steering 2.2gpm (2320) 5.5gpm (2520)
Implement 3.4gpm (2320) 5.0gpm (2520)
Total 5.6gpm (2320) 10.5gpm(2520)
BTW, the 2305 is 5.2gpm total
Lift capacity(24in behind link arms) 1,150lbs (2320 & 2520 are the same)
Weight 1,660lbs (2320) 1,865lbs (2520)
The copied page also has a few measurements. The hood height shows 53.3" (2320) and 47.2" (2520) but I think those numbers should be reversed. Folded ROPS height is 67.9" (2320) and 68.9" (2520). Sorry, the length wasn't copied.
The dealer couldn't give a price yet.
Later,
Brian
bigpete
Veteran Member
OBG: <font color="blue"> When I tried a 4110 (supposedly the same engine as 2210) it felt much rougher through the seat of the pants compared to the 2210’s very smooth feel.
</font>
I have owned both and have the complete opposite experience. My 4110 runs smoother, with a deeper exhaust and at a lower RPM. The 4110 does have a better isolation system than the 2210, including vibration damping all the way through the floorboards.
</font>
I have owned both and have the complete opposite experience. My 4110 runs smoother, with a deeper exhaust and at a lower RPM. The 4110 does have a better isolation system than the 2210, including vibration damping all the way through the floorboards.
orangebluegreen
Gold Member
Hmmmm, johndeere_2210’s post says “larger tires”, jimdiesel’s post says “tire sizes will be 31x13.50-15(R-3)”. Just re-read the JD brochure and see that is the same tire size the 4110 had that I didn’t care for due to stealing a bit of deck stick out. Wonder which is correct, larger or same?
Bigpete:
A bit hard to explain but I’ll try crudely perhaps. When I fired up a new 4110 and ran it through the rpm ranges, I felt and heard roughness through the entire machine and a sound very similar to when a car diesels (the unhappy kind). I will add it was only a couple feet away from the side of a building and under roof so the natural diesel noise was exaggerated, but I tried to place that out of my mind and concentrate on feel. Now the 4110 was not worse than most tractors IMO, just when I jumped on the 2210 it to me was so much more isolated and sounded so much smoother, it was night and day to me, it was hard to imagine them being the same basic engine. Just my short experience with them.
Bigpete:
A bit hard to explain but I’ll try crudely perhaps. When I fired up a new 4110 and ran it through the rpm ranges, I felt and heard roughness through the entire machine and a sound very similar to when a car diesels (the unhappy kind). I will add it was only a couple feet away from the side of a building and under roof so the natural diesel noise was exaggerated, but I tried to place that out of my mind and concentrate on feel. Now the 4110 was not worse than most tractors IMO, just when I jumped on the 2210 it to me was so much more isolated and sounded so much smoother, it was night and day to me, it was hard to imagine them being the same basic engine. Just my short experience with them.
bigpete
Veteran Member
That's a purely anectdotal comparison. I put 135 hours on my 2210 and traded up. Now up to 198 hours on my 4110. The 4110 is a FAR smoother running, more feature-rich, and more "deluxe" tractor in almost all regards. The 2210 is an awesome machine in its own right, but it is the economy model in the lineup with a less isolated engine for vibration and sound.
orangebluegreen
Gold Member
Anecdotal in your eyes perhaps, but based on a lifetime of experience in the industry with various machines, as well as having built, maintained, and worked on, tractors dump trucks and race cars of varying types for decades and is stated as my opinion as is yours.
bigpete
Veteran Member
As compared to 300+ hours of experience owning both models, your brief encounter starting a single machine is anectdotal. The paraphrased definition of anectdotal is the extension of a conclusion or opinion based on a fleeting experience or a very small amount of data that does not represent the universe of possibilities. Seems to me you started one machine and drew a conclusion.
Buy what you want and enjoy. Don't mislead others along the way, though /forums/images/graemlins/smile.gif /forums/images/graemlins/tongue.gif /forums/images/graemlins/grin.gif I sing praises of both machines!
I hope the new machines are smoother than both!
Buy what you want and enjoy. Don't mislead others along the way, though /forums/images/graemlins/smile.gif /forums/images/graemlins/tongue.gif /forums/images/graemlins/grin.gif I sing praises of both machines!
I hope the new machines are smoother than both!
orangebluegreen
Gold Member
I take exception to your statement I am misleading anyone. If experience with your ONE of each machine appears the opposite of mine, it does not mean my results are any less valid than yours. You are attempting to say I did not experience what I DID. Years of experience with many types of machines gives one a “feel” that does not take 300 hours to figure out, especially when it is so obvious as my experience with them was. The 2210 and 4110 are so similar your statements that the 4110 are so far above the 2110 would lead me to believe you have a need to justify to yourself or are trying to sell one. Whatever bud, knock yourself out, but you’re not going to change my mind what I IN FACT DID FEEL.
End of discussion with you.
End of discussion with you.
Back to the new Brochure specs.....The 2320 has the same 1,150 lb. lift capacity, but why is the hydraulic flow less than the 4110 it replaces?
model /steering gpm/ Implement gpm/ total gpm
4110= 2.3 -------------5.1 -----------------7.4
2320= 2.2 -------------3.4 -----------------5.6
The 2320's hydraulics are equal to the 4010, and comparable to the 2210/2305 subCUTs.
I don't guess this really matters, just curious as to why "new and improved model" has less flow?
model /steering gpm/ Implement gpm/ total gpm
4110= 2.3 -------------5.1 -----------------7.4
2320= 2.2 -------------3.4 -----------------5.6
The 2320's hydraulics are equal to the 4010, and comparable to the 2210/2305 subCUTs.
I don't guess this really matters, just curious as to why "new and improved model" has less flow?
bglombowski
Member
Hey 73jeep, thanks for bringing us back on track. I too was a little surprised at the low pump numbers, but then again, I'm not a hydraulic guy. Maybe someone can help with this discussion. I suspect gpm (gallon per minute) relates to speed and not necessarily to strength. Maybe somehow the 2320 has consideribly more "strength?" (psi)? than the 2305,etc. Ok, someone please educate me.
Brian
Brian
