3-Point Hitch 2555 additional rear remote

[sjp649]

Looking add 1 or 2 more rear remotes to the current stock one. I'd like to try and use factory stuff so it looks good to. Any ideas and where I can buy a kit?

 

[DirtHauler]

You can order the kit from any Mahindra/TYM dealer. You can add two additional rear remotes for a total of 3. If you decide to add 2 additional, you'll have to buy the longer studs also.

 

[sjp649]

Thank you. Have a call into my dealer already

 

[Spentit]

Looking add 1 or 2 more rear remotes to the current stock one. I'd like to try and use factory stuff so it looks good to. Any ideas and where I can buy a kit?

I am looking to add also. Let us know how things pan out.

 

[MtnViewRanch]

I am looking to add also. Let us know how things pan out.

My local Mahindra dealer was adding the 2nd & 3rd rear remotes to a 2565 so that the guy could have a top & tilt set and operate hydraulic actuated rippers on his box blade. I saw the 2 valve kits, seemed like it was going to be a pretty easy installation to me. :thumbsup:

 

[Spentit]

Any word on the cost for each kit? I will install myself.

 

[e5wd6114]

Remember to specify what kind of remote you want....the Mahindra 2500 series has 3 styles: Fwd/Neutral/Rev Detent, FWD/Neutral/Rev Momentary return to neutral, and Fwd/Neutral/Rev Momentary with a Detent Float. If you need constant flow stick with the stock detent style...but if you are running mower outriggers or anything with cylinders controlled by the valve in the cab...the momentary ones work better for that.

 

[Spentit]

I have one on there now with the detent function I would like to add a momentary for a hydraulic top link. Does anyone know if the rear remote was standard equipment on my 1016 2565 cab shuttle? I recently bought it used.

 

[MtnViewRanch]

I have one on there now with the detent function I would like to add a momentary for a hydraulic top link. Does anyone know if the rear remote was standard equipment on my 1016 2565 cab shuttle? I recently bought it used.

I believe that the 2565s come with a single rear remote std and an additional 2 sets are available.

 

[Reb954]

I have one on there now with the detent function I would like to add a momentary for a hydraulic top link. Does anyone know if the rear remote was standard equipment on my 1016 2565 cab shuttle? I recently bought it used.

My 2565 came with one rear remote, I also added a second one.

 

[sandman2234]

I have a JD2555 and the company that it came from (used) often throws me some of the extra parts as they pop-up in their way on shelves. I got a pair of rear remotes to add to my pair so I naturally clicked on this post, only to realize that it wasn't a green tractor you were looking for remotes to install.
David from jax

 

[Spentit]

Thats ok David. "It ain't easy being green". Some remote kits aren't brand specific.

 

[flusher]

I had triple rear remotes installed on my 2008 Mahindra 5525 by the dealer. His own design. $750 option.



It helps to have flat top fenders. Makes the installation easier.

Best to get options like this when you buy the tractor rather than retrofitting.

Good luck.

 

[OldTrix]

My 2565 came with one rear remote, I also added a second one.

Old thread, I know, hoping you could share how you added additional remotes? looking to add a second remote on my 2665

 

[Engineer42]

Old thread, I know, hoping you could share how you added additional remotes? looking to add a second remote on my 2665

They stack. Remove bolts in existing, place new valve body on top of existing, replace bolts with longer ones.

 

[Walter L]

Yep easy set up on non cab tractor it gets a bit complex with the cab tractor and real hard to find some TYM built tractor kits and very expensive, i could not find one for my 2660 cab TYM built tractor at a reasonable price with plans to use in place of a 3 function, both were way above $1000 so i found a company that makes a kit that once installed it can take the scope and rooal function of the loader ad use for in my case my grapple or in other cases a rear remote

 

[Walter L]

The kit was $625 shipped and tax to me