burzynsr
Gold Member
- Joined
- Jun 9, 2010
- Messages
- 270
- Location
- Grimes county Texas
- Tractor
- Mahindra 4025 / Kubota RTV500 / Bad Boy ZT Elite 60"
Does the 4025 have a fitting?? I have never seen one, but I was not looking for it either.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Grading 2555 Died & Won't Start
- Thread starter SethWilliams
- Start date
- Views: 16206
burzynsr
Gold Member
- Joined
- Jun 9, 2010
- Messages
- 270
- Location
- Grimes county Texas
- Tractor
- Mahindra 4025 / Kubota RTV500 / Bad Boy ZT Elite 60"
Re: 2555 Died & Won't Start
Nothing in the manual about it that I have seen.
Nothing in the manual about it that I have seen.
Does the 4025 have a fitting?? I have never seen one, but I was not looking for it either.
No sir
OP
SethWilliams
Bronze Member
They brought my tractor back yesterday. I was digging post holes for my fence and I see my tractor coming down the driveway. No call, no update, nothing. I can’t say I’m impressed with my dealer.
The tractor, however, started right up and ran great. The only issue I noticed is the light that comes on when the engine is cold is now coming on every time I start the engine and it stays on for a couple minutes. Not a big deal.
It sure is nice to have her home. She just topped 100 hours yesterday as well - hopefully I will have many more hundreds with no issues.
The tractor, however, started right up and ran great. The only issue I noticed is the light that comes on when the engine is cold is now coming on every time I start the engine and it stays on for a couple minutes. Not a big deal.
It sure is nice to have her home. She just topped 100 hours yesterday as well - hopefully I will have many more hundreds with no issues.
Ha your software must have not been updated yet. The heater light is suppose to do that with the new update youll get a pre start that you need to let run before you crank once its off you crank the tractor and youll get another time process. Good to go
erkme73
Silver Member
Are you working with Mountain Farm out of Crossville? I just bought a neighbors 2016 2555 cabbed HST, and the bumper-to-bumper warranty runs out in 4 months. I called MF to find out about the service record, and what they recommend. After 3 calls, I still don't have my answer. Not off to a good start.
mikeman1
Silver Member
Hey erkme, dont know if you are new to tractors but a few things i found useful doing to mine was wrapping up hyd hoses that were close to metal frame,etc. with old inner tube and zip ties to prevent wear. used paint pen on clean metal to put witness marks on any bolts/nuts that were structural in nature so i can see at a glance if tnhey are loosening up. such as rim bolts/ loader frame bolts, etc. used dieeltrci grease on various connections to help prevent corrosion. sprayed lube on the throttle cable/body that is mounted to the left side of engine since it would periodically not go to full throttle. did it about 75 hours ago and no problem since. now have close to 90 hours.
meh, right or wrong this is what i did and seems to help. i am enjoying using my OS 2555 hst. got it ready for winter plowing.
meh, right or wrong this is what i did and seems to help. i am enjoying using my OS 2555 hst. got it ready for winter plowing.
CincyFlyer
Veteran Member
I just found that fitting last week. Greased for the first time after 170hrs. How often do the recommend it get done?
Mine seems to have an "outboard support" that has a fitting. Similar placement.