3 Point Fronthitch Kubota BX25

[zunnie]

Hello , dear People

I疥 a owner of a BX 25 in Holland and a like to have some pictures or and

drawings to make a 3 point fronthitch including drive shaft !!

I hoop some body can help me ,,thank you in advance !!


Regard Zunnie from Holland:thumbsup:

 

[Muhammad]

Welcome to TBN.

 

[Briana03]

Hello & WELCOME to TBN!

I moved your thread to the Build-It Yourself Forum.

 

[smiley]

Zunnie,
Welcome aboard, you've come to the right place as there are some front 3 pt hitch conversions on here. I did one for a front mount blower on my Massey Ferguson 399 4wd. You can see the entire process here. The only problem I've encountered is throwing the rear drive chain under heavy load. I need to modify the rear drive sprockets/chain to eliminate any possible flexing of the pto shaft, much like the reverser unit that I mounted up front with flange bearings supporting the end of the shaft If I had mounted the reverser in back the way it was designed, I wouldn't have the problem, but I didn't want to take the reverser off in the summer and had plenty of room for it in front.
Hope this helps.
http://www.tractorbynet.com/forums/build-yourself/187397-max-snow-beast-finished.html