3 point hitch pins

[frankp0202]

i am looking to find the 1/2 inch dia. pins that go thru the attachment bars on the 3 pt hitch that have female instead of male threads to secure them to the attachment. Has anyone got any help

 

[beenthere]

A picture would help. I'm not following the question. 1/2" diam pins with female threads?

 

[RoyJackson]

I'm pretty sure he's asking about the pins on the implement that engage the tractor's draft (lower) links.
I've never seen them with female threads, but I can't say I've ever looked for them either.

frankp0202 could check out Tractor Supply or contact the implement manufacturer.

 

[lawn_king]

Threads? Im missing something here?

 

[om21braz]

Not quite sure of your use for them, but check the link below to see if this is similiar to what you're looking for.

McMaster-Carr

 

[Army grunt]

Could you let us in on what it is your trying to do?
Army Grunt

 

[JDGreenGrass]

I'm not sure what the question is either.


I was going to respond last night but I didn't want to be the first to admit that I didn't know what "female threads" are.:laughing:

I assume he is looking for pins that go on an attachment.??....Should be easy enough to find.??....No.??

 

[om21braz]

I'm not sure what the question is either.


I was going to respond last night but I didn't want to be the first to admit that I didn't know what "female threads" are.:laughing:

I assume he is looking for pins that go on an attachment.??....Should be easy enough to find.??....No.??

Just consider male threads as threads you see on a bolt & female threads as those where the bolt screws in. Male = external threads ; Female = internal threads

 

[beenthere]

I'd think a nut has female threads. Like male threads are made with a die, and female threads with a tap.
Maybe OP Frankp0202 will enlighten us all. Seems we learn something new everyday here.

 

[JDGreenGrass]

Just consider male threads as threads you see on a bolt & female threads as those where the bolt screws in. Male = external threads ; Female = internal threads

Ooohh. I get it.

Now, I wonder why Frank needs female threads.??