3-Point Hitch 3 Point Hitch Set Up

   / 3 Point Hitch Set Up #1  

Miky275

New member
Joined
Aug 31, 2018
Messages
5
Location
Birmingham UK
Tractor
Iseki TS3510
Hi Guys.

I have an Iseki TS3510 Tractor that i am curently restoring. The theree point hitch seems strange (well to me it dose). The top link is connected to the upper lift arms and it changes the length of the top link as the arms are moved up and down from what i can see. As the previous owner has disconnected it as he asaid he couldnt get his mower or tiller to sit right wit it connected. So im wondering is this a 3 point hitch for specialist applications or attachments. As to be honnest it the first one ive seen like thism As im thinking about removing it and fitting a standard top link bracket.

Kind Regards

Miky

20180903_194244.jpg
Screenshot_20180919-205016_Gallery.jpg
 
   / 3 Point Hitch Set Up #2  
I think you're missing a part, the only picture of an Iseki TPH shows another bracket for the top link to hook to. Enlarge this picture and you can see the bracket above the point yours is attached.Iseki.jpg


After I looked at your picture again, I'm not sure.
 
   / 3 Point Hitch Set Up
  • Thread Starter
#3  
That bracket in the picture you sent looks like one that can be fitted in place of the one I've got. As the one on mine when the arms are raised it pulls the top link it towards the tractor. And when it is lowered it pushed the top link away. It's like automatic top link tilt so when lowering it would lower the back off the attachment more then the front. An the opposite when raising

Regards

Miky
 

Tractor & Equipment Auctions

2021 FORD F-150 XL EXT CAB TRUCK (A51406)
2021 FORD F-150 XL...
2007 STERLING L9500 MIXER TRUCK (A50854)
2007 STERLING...
2020 Barreto 20RTK 36in Stand-On Trencher (A49461)
2020 Barreto 20RTK...
2018 John Deere 60G Excavator (A50490)
2018 John Deere...
PALLET OF TARPS, UMBRELLAS, AND PORTABLE SHADES (A50854)
PALLET OF TARPS...
CFG MH12RX Mini Excavator (A49461)
CFG MH12RX Mini...
 
Top