A friend of mine bought a 2810 HST with loader and 3 point hoe. The hoe is not subframed. He is digging a small pond and has used it to pull some small stumps. Is he heading for trouble with the hoe not be subframed?
3-Point Hitch 3-point hoe WITHOUT subframe
- Thread starter MDM
- Start date
- Views: 1177
Tim_in_IA
Platinum Member
- Joined
- Feb 14, 2005
- Messages
- 840
- Location
- Eastern Iowa
- Tractor
- Kubota B7610HSD, Mahindra 6500 4WD, JD 440ic crawler, 2 560 farmalls.
good way to split a tractor in half. I looked at 3pt hoes before I got my subframe 511. There were too many scarry stories of tractors splitting in half. From what I read it is worth the money for the subframe instead of paying the mechanic and medical bills for the 3pt. He should check to see if they make a subframe for that hoe tractor combo, or see if a local shop could fabricate one.
YanmarFever
Elite Member
- Joined
- Mar 10, 2002
- Messages
- 3,351
- Location
- Eating a melon..
- Tractor
- Mahindra 5010C- Branson 4520r- 5520C- Yanmar FX235-D - Bad Boy rogue mower
MDM
Tell your friend that Mahindra will not stand behind the warranty if a non Mahindra backhoe is used & it damages the tractor. It states this in his warranty card, tell him to read it.
Ernie's Imports
Tell your friend that Mahindra will not stand behind the warranty if a non Mahindra backhoe is used & it damages the tractor. It states this in his warranty card, tell him to read it.
Ernie's Imports
</font><font color="blue" class="small">( MDM
Tell your friend that Mahindra will not stand behind the warranty if a non Mahindra backhoe is used & it damages the tractor. It states this in his warranty card, tell him to read it.
Ernie's Imports )</font>
He knows this. It is not a Mahindra hoe. It was, however, sold to him by the Mahindra dealer. The dealer made him aware of the warranty issue.
Tell your friend that Mahindra will not stand behind the warranty if a non Mahindra backhoe is used & it damages the tractor. It states this in his warranty card, tell him to read it.
Ernie's Imports )</font>
He knows this. It is not a Mahindra hoe. It was, however, sold to him by the Mahindra dealer. The dealer made him aware of the warranty issue.
dbelisle
Gold Member
A sub frame for my 2810 HST cost less than $500.00 and that included the shipping, I don't think I would feel comfortable working my hoe like I do if It where hung on my 3PT. If anything between the hoe and the tractor failed, or if you lost a pin, that 1,000 pound hoe would fold into that 3,000 pound tractor with you right in the middle.
I have been stuck to the point I had to turn the tractor around 180 degrees with the hoe. I wouldn't what to try that with a 3PT setup.
Dave in NH
I have been stuck to the point I had to turn the tractor around 180 degrees with the hoe. I wouldn't what to try that with a 3PT setup.
Dave in NH
jpm
Platinum Member
i had a 2810 gear w a 3265 3 pt hoe,a HUGE pain to mount and dismount from the tractor plus the potential for body damage to me made me go for the subframe and it was worth it big time. your buddys dealer did him a big disservice selling him a 3pt
