I have a Kubota BX2230 and looking for a log splitter and considering a 3-point log splitter attachment. I found a 15-ton splitter on the Gearmore website - Model LS20E. I'd like some feedback if anyone has experience with this splitter and how it might work on a sub-compact tractor. My biggest concern is the hydraulic pump output on the tractor is 5.5 gpm, but the log splitter manual recommends 8-15 gpm at 1500-2500 PSI.
3-Point Log Splitter
- Thread starter rgarza348
- Start date
- Views: 2694
greg_g
Super Member
- Joined
- Dec 18, 2003
- Messages
- 6,126
- Location
- Western Kentucky
- Tractor
- JD3720 Cab, 300X loader with 4-in-1 bucket
Then why are you even considering it in the first place? It's simply not enough tractor. I don't believe you'll find a 4" splitter for a tractor that small. You should consider dropping down to a 3". Here's a possibility: Amazon.com: Powerhorse Horizontal Log Splitter - 3 Pt., 13-Ton Ram Force, 3in. x 18in. Cylinder: Home Improvement
//greg//
kennyd
Advertiser
Welcome to TBN
The splitter will work, but it will be SLOW. There are MANY post's here on TBN about 3PH splitters and the positives/negatives of them if you search a little.
The splitter will work, but it will be SLOW. There are MANY post's here on TBN about 3PH splitters and the positives/negatives of them if you search a little.
