3 Point tray i made

   / 3 Point tray i made #4  
It is not clear to me from the pictures how you fasten the wood tray to the 3 pt system. It looks to me like it would fall off from its own weight. How did you do that?
 
   / 3 Point tray i made
  • Thread Starter
#5  
Donman said:
It is not clear to me from the pictures how you fasten the wood tray to the 3 pt system. It looks to me like it would fall off from its own weight.
* How did you do that?

Take a closer look at this picture.
http://i283.photobucket.com/albums/kk286/lb59/100_2351.jpg
See the 2 hitch pins going through the i bolts on each side of each 3 point arm.
The hitch pins eye bolts and hitch clips are what keeps the tray from falling off.
The eye bolts are screwed into the bottom of the tray and stradle the 3 point arms.
 

Tractor & Equipment Auctions

80in HD Tooth Bucket with Side Cutters ONE PER LOT (A48561)
80in HD Tooth...
2004 Caterpillar 345B Hydraulic Excavator (A46683)
2004 Caterpillar...
3050 (A49339)
3050 (A49339)
2 Yard Self-Dumping Hopper (A46502)
2 Yard...
3/8in. AR500 Gong Target (A49339)
3/8in. AR500 Gong...
Toro Mower (A46684)
Toro Mower (A46684)
 
Top