Cnowark
New member
- Joined
- Oct 16, 2023
- Messages
- 1
- Tractor
- Allis 5040
On my allis 5040 the 3 point is ether up or down there’s no control any suggestions
I am not familiar with your tractor, but most three point lifts have a mechanism to provide position feedback to the valve for controlling lift height. Sometimes it's a small linkage from one of the rockers to a bell crank arm on the side of the case. Sometimes the mechanism is inside the case. If the linkage comes apart, then the three point will go all the way up with any setting as there is no feedback to stop it.