3320 w/attachments

[crazylare1]

Hey there, just thought that I'd post some pic's of my new 3320 with the attachments that I've been working on.
This picture is of an old plow that used to be on my 1952 jeep that's been sitting in the woods for at least 16yrs. It's in pretty rough shape, and I need to make it fit the quick mount on the front of the 300cx?

 

[crazylare1]

Here is a pic of the plow mounted on the loader, I used a bradco quick detach fork mount as a starting point for the project. I then made sliding mounts to put on the bradco and used 4 pins to mount that to the plow frame. I made it this way so that I could pull the 4 pins, and put a set of homemade forks on the bradco and still be able to adjust the forks from side to side.

 

[crazylare1]

Here's the finished plow all painted

 

[crazylare1]

Here's a picture of the old back blade that my dad gave me that's probably as old as me. I had to completelly reweld the cutting edge top and bottom, and also the mount that holds the frame on the blade, it was so loose and broken that it chattered when I used it. I wish that I would have taken a pic of it before the repairs and paint job.

 

[crazylare1]

Finally this last picture is of the tractor with the attachments. My new backhoe is at the dealer and the parts should be in anyday now to put it on the tractor. As soon as it's done I'll add the pictures to this post.
I had to hurry after taking the pic's the little guy was already to go out back to ride his dirt bike.
p.s. I also want to thank bloomingtonmike for down sizing the pic's for me otherwise I wouldn't be able to post pic's /forums/images/graemlins/ooo.gif

 

[mhalla]

<font color="green">Wow, Great job! Mike </font>

 

[JD3520]

Who much did the autopilot in the gray suit and the helment cost? Mine was more than the tractor and i have yet to find the disconnect button. He is on it all the time.

chuck

 

[crazylare1]

Hey Chuck, the little guy and his older brothers came free with my girlfriend when I met her. But I've found them to be alittle costly but worth every penny! /forums/images/graemlins/cool.gif Thanks for the reply!
Larry

 

[crazylare1]

Hey Chuck, how about a pic of your autopilot, mine isn't heavy enough to activate the seat switch so he can only steer the tractor. Now the older brothers on the other hand would love to get to drive it but at 10 and 12 yrs old they still only get to drive it around the field, but as soon as the weather warms up I plan to let them use the bucket to dig some dirt. I suppose then I'll have the same problem as you /forums/images/graemlins/smirk.gif have a great weekend!
Larry

 

[turbo36]

Howdy Larrry, do you ever take your guys over to Big Air (or "Big Scare" as I like to call it?)
Where did you get the Bradco fork attechment from and what was the cost?