3pt Sprayer Project

   / 3pt Sprayer Project #1  

GaryBDavis

Gold Member
Joined
Dec 12, 2004
Messages
429
Location
Andice, Texas
I've mostly finished my 3pt sprayer project and thought I'd share some photos of it.

It's a 230 gallon tank. The frame is home made for category II. The pump is a typical roller style PTO pump that will put out 12GPM at 100PSI.

I wanted to be able to use it in different configurations, so I made my own "quick-tach" system. The only attachment I've made so far is for a hose reel. I made it large enough for someone to stand on (that's hand rail to hang on) so I could go around wetting down grass before burning my brush piles (or for putting out that grass fire!).

I got all my stuff at Wylie Sprayer in Waco, Texas. They were a big help.
 

Attachments

  • 780411-IMG_6414_resize.JPG
    780411-IMG_6414_resize.JPG
    41.2 KB · Views: 816
   / 3pt Sprayer Project
  • Thread Starter
#2  
Rear View
 

Attachments

  • 780412-IMG_6408_resize.JPG
    780412-IMG_6408_resize.JPG
    32.6 KB · Views: 541
   / 3pt Sprayer Project
  • Thread Starter
#3  
Another rear view.
 

Attachments

  • 780413-IMG_6407_resize.JPG
    780413-IMG_6407_resize.JPG
    74.7 KB · Views: 422
   / 3pt Sprayer Project
  • Thread Starter
#4  
Close up of my custom "quick-tach".
 

Attachments

  • 780415-IMG_6402_resize.JPG
    780415-IMG_6402_resize.JPG
    49 KB · Views: 437
   / 3pt Sprayer Project
  • Thread Starter
#5  
The bottom of the custom "quick-tach".
 

Attachments

  • 780416-IMG_6405_resize.JPG
    780416-IMG_6405_resize.JPG
    59.9 KB · Views: 355
   / 3pt Sprayer Project
  • Thread Starter
#6  
The mounting plate for the control deck is bolted on so I can expand and change it if needed. I have two manual valves. When I build the spray boom, I'll add a couple of electronic solenoids. This is a manifold type set up that can be expanded by adding "sandwitching" additional valves. The small line at the end with the ball valve allows you to have a high pressue agitator line if you crack the ball valve open a bit.
 

Attachments

  • 780420-IMG_6409_resize.JPG
    780420-IMG_6409_resize.JPG
    64.3 KB · Views: 404
   / 3pt Sprayer Project #7  
WOW great job!

I sure would like to have a "Mini" version of that!
 
   / 3pt Sprayer Project #8  
Gary that's one serious sprayer! Gotta love your quick attach system too. Nice work, thanks for sharing those great shots.
 
   / 3pt Sprayer Project #9  
They say everything is bigger in Texas!
 

Tractor & Equipment Auctions

2023 FG INDUSTRY STE 35SR MINI EXCAVATOR (A51222)
2023 FG INDUSTRY...
WITTIG VACUUM PUMP (A50854)
WITTIG VACUUM PUMP...
TAKEUCHI TB2150 EXCAVATOR (A51242)
TAKEUCHI TB2150...
2015 FORD F-250XL SUPER DUTY SERVICE TRUCK (A51406)
2015 FORD F-250XL...
2017 NISSAN NV200 VAN (A51406)
2017 NISSAN NV200...
2006 MACK CV713 KILL TRUCK (A50854)
2006 MACK CV713...
 
Top