3pt Sprayer Project

   / 3pt Sprayer Project #1  

GaryBDavis

Gold Member
Joined
Dec 12, 2004
Messages
429
Location
Andice, Texas
I've mostly finished my 3pt sprayer project and thought I'd share some photos of it.

It's a 230 gallon tank. The frame is home made for category II. The pump is a typical roller style PTO pump that will put out 12GPM at 100PSI.

I wanted to be able to use it in different configurations, so I made my own "quick-tach" system. The only attachment I've made so far is for a hose reel. I made it large enough for someone to stand on (that's hand rail to hang on) so I could go around wetting down grass before burning my brush piles (or for putting out that grass fire!).

I got all my stuff at Wylie Sprayer in Waco, Texas. They were a big help.
 

Attachments

  • 780411-IMG_6414_resize.JPG
    780411-IMG_6414_resize.JPG
    41.2 KB · Views: 818
   / 3pt Sprayer Project
  • Thread Starter
#2  
Rear View
 

Attachments

  • 780412-IMG_6408_resize.JPG
    780412-IMG_6408_resize.JPG
    32.6 KB · Views: 543
   / 3pt Sprayer Project
  • Thread Starter
#3  
Another rear view.
 

Attachments

  • 780413-IMG_6407_resize.JPG
    780413-IMG_6407_resize.JPG
    74.7 KB · Views: 423
   / 3pt Sprayer Project
  • Thread Starter
#4  
Close up of my custom "quick-tach".
 

Attachments

  • 780415-IMG_6402_resize.JPG
    780415-IMG_6402_resize.JPG
    49 KB · Views: 439
   / 3pt Sprayer Project
  • Thread Starter
#5  
The bottom of the custom "quick-tach".
 

Attachments

  • 780416-IMG_6405_resize.JPG
    780416-IMG_6405_resize.JPG
    59.9 KB · Views: 357
   / 3pt Sprayer Project
  • Thread Starter
#6  
The mounting plate for the control deck is bolted on so I can expand and change it if needed. I have two manual valves. When I build the spray boom, I'll add a couple of electronic solenoids. This is a manifold type set up that can be expanded by adding "sandwitching" additional valves. The small line at the end with the ball valve allows you to have a high pressue agitator line if you crack the ball valve open a bit.
 

Attachments

  • 780420-IMG_6409_resize.JPG
    780420-IMG_6409_resize.JPG
    64.3 KB · Views: 405
   / 3pt Sprayer Project #7  
WOW great job!

I sure would like to have a "Mini" version of that!
 
   / 3pt Sprayer Project #8  
Gary that's one serious sprayer! Gotta love your quick attach system too. Nice work, thanks for sharing those great shots.
 
   / 3pt Sprayer Project #9  
They say everything is bigger in Texas!
 

Tractor & Equipment Auctions

2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2012 John Deere 850K Crawler Tractor Dozer (A52377)
2012 John Deere...
2015 MACK ELITE LEU633 GARBAGE TRUCK (A51406)
2015 MACK ELITE...
2013 Chevrolet Caprice Sedan (A50324)
2013 Chevrolet...
2012 CHEVROLET SILVERADO SINGLE CAB TRUCK (A51406)
2012 CHEVROLET...
2010 Toyota Prius Hybrid Hatchback (A53424)
2010 Toyota Prius...
 
Top