Hi all, Brand new to this site but I have been reading for a while. I was wondering if anyone has added a 3rd fuction valve to there T233. Been looking into it but I am not sure what to lok for. Is there a kit available for this model? anyway any advise would be helpful.. Thanks ahead of time!
Buying Advice 3rd function valve
- Thread starter JTH
- Start date
- Views: 2740
Are thinking something like this http://www.tractorbynet.com/forums/...2-rear-remote-options-t273-2.html#post1587257
or an option off the joystick?
or an option off the joystick?
O...I did want to ask U a couple of thigs.....
1) on your remote. did you plug into the existing ports and the to the valve spool body?
2) R U using a open center valve and running the return back thru the other side of the rear remote?
3) also is there any way I could get more Pics of the in stall and discription? i'm not really what you call an expert with hydraulics and im learning as I go.
1) on your remote. did you plug into the existing ports and the to the valve spool body?
2) R U using a open center valve and running the return back thru the other side of the rear remote?
3) also is there any way I could get more Pics of the in stall and discription? i'm not really what you call an expert with hydraulics and im learning as I go.
SPYDERLK
Super Star Member
- Joined
- Feb 28, 2006
- Messages
- 12,569
- Location
- VA
- Tractor
- JD2010, Kubota3450,2550, Mahindra 7520 w FEL w Skid Steer QC w/Tilt Tatch, & BH, BX1500
The type is tandem center, a form of closed center valve that routes the pressure supply back to the return line when in the centered position while at the same time blocking the work ports to lock a cyl. An open center type would not lock the cyl when centered because it connects all ports together when centered.
larry
Awsome!.....Thanx larry. exactly what I needed to know.
