Rotary Cutter 4" Rotary Cutters that work with iMatch

   / 4" Rotary Cutters that work with iMatch #1  

powwowell

Member
Joined
Jun 8, 2012
Messages
31
Location
Deep Run, NC
Tractor
John Deere 1026R
I'm shopping for a 4' rotary cutter to use with a JD 1026R. My physical condition requires me to use implements that are compatible with the JD iMatch. Any suggestions from those who have been there?

And,any suggestions for a 4" rotary tiller?

Thanks, Larry
 
   / 4" Rotary Cutters that work with iMatch #2  
I don't remember seeing any 4' cutters that were QH ready. That said, I managed to convert my 4' BushHog.

57B4430E-84DC-4BE2-81B0-02D5CDAC94C5.jpeg

1BC94C3C-0028-48B6-BA0F-C6A837912C88.jpeg
 
   / 4" Rotary Cutters that work with iMatch #3  
Frontier makes a nice one.

 
   / 4" Rotary Cutters that work with iMatch
  • Thread Starter
#4  
Thanks for the advice. I think I've made my decision.
Larry
 
   / 4" Rotary Cutters that work with iMatch #5  
Thanks for the advice. I think I've made my decision.
Larry
Late addition I saw in my travels that I don't have experience with is a King Kutter 4' with Flex hitch. I've seen them iMatch and Quick hitch compatible for as little as $1000 for one with a sheet bolt. Price climbs as you add things like slip clutch.

If you found your dream machine... What did you get? Any pictures?
 
   / 4" Rotary Cutters that work with iMatch
  • Thread Starter
#6  
I will share pictures when I make the purchase.
 
   / 4" Rotary Cutters that work with iMatch #7  
Anticipation....:)
 
   / 4" Rotary Cutters that work with iMatch #8  
The LX-4 was, but I don't recommend it. I do recommend the Frontier. Have had it on the 1025 and the 2025. So much easier to remove the blades because the stump jumper stays in place.

Ralph
 
   / 4" Rotary Cutters that work with iMatch #9  
The thing about rotary cutters is you shouldn't have a rigid top link hookup. It needs to float. I have a Howse (not sure you can get this brand anymore) and the top link hookup has a slot allowing the top link to float. I got a top link quick hitch adapter and it works pretty slick.

cutter top link close.jpg

A closer look at the adapter hooked up to the top of the iMatch:

top link adapter.jpg
 
   / 4" Rotary Cutters that work with iMatch
  • Thread Starter
#10  
Bought a used King Kutter (TG-48-YK) today. It does hook up to the iMatch. I would like to have a manual for it. Willing to pay for one. I was not able to find one on the web. Kept getting I needed to add Google stuff? I assume the tiller has lost some of the gear oil. Looking to pick up a used Kodiak 4 Ft. brush cutter tomorrow. The newer promotions say the Kodiak is Quick Hitch compatible.
 

Attachments

  • IMG_1642[1].JPG
    IMG_1642[1].JPG
    5.9 MB · Views: 639
  • IMG_1643[1].JPG
    IMG_1643[1].JPG
    4.3 MB · Views: 531
  • IMG_1644[1].JPG
    IMG_1644[1].JPG
    6.9 MB · Views: 472
 

Tractor & Equipment Auctions

2019 Chevrolet Tahoe SUV (A45336)
2019 Chevrolet...
2025 Future FT-D45 50in Pile Hammer Mini Skid Steer Attachment (A45336)
2025 Future FT-D45...
2012 KENWORTH T800 MID-ROOF SLEEPER (A47001)
2012 KENWORTH T800...
2015 Fiat 500L Hatchback (A46684)
2015 Fiat 500L...
More info coming soon! (A44572)
More info coming...
2008 Ford F-350 4x4 Crew Cab Pickup Truck (A46684)
2008 Ford F-350...
 
Top