4210 syncshift funkyness

   / 4210 syncshift funkyness #1  

monkey

New member
Joined
Apr 11, 2003
Messages
4
I've got a new (1.5 weeks old) JD 4210 4wd with the standard syncshift transmission. The shift lever runs through a plastic piece that has an H-shaped slot routed out to guide the shift lever. What I've found is that when I shift it into 3rd, a lot of times it will go into reverse unless I make a concerted effort to pull the lever over towards me. I've already had a service man come out and work on it once. He replaced something, but it still does it. It's not as bad, but the problem remains. I don't think it's a transmission problem... just some kind of lever adjustment thing getting the shifting aligned with the guide. When I'm trying to shift to 3rd, the last thing I want to happen is for it to go into reverse. Anybody else out there with a syncshift transmission encountered this problem? Were you able to fix it?
 
   / 4210 syncshift funkyness #2  
I have a 4200 and had similar problems. I don't think the plate the shifter runs through is big enough. Mine finally broke and I don't have the problem anymore, but you do have to be careful not to get 3rd & reverse mixed up.

Another thing to watch for, there is a u-joint in the shifter linkage that tends to bind up, especially if you're working in a dusty area. I keep a can of WD-40 in the tool bin to squirt if the shifter gets fussy.

Good luck,

Bud
 
   / 4210 syncshift funkyness
  • Thread Starter
#3  
Bud,

Just curious... did your tractor have the shifting problem when it was new? Did you talk to the dealer about it? What'd they tell you? If you and I are the only ones that have encountered this, then I feel like it can be fixed. Or else you and I are the only ones with the shifter mounted next to the seat.

Makes me wish I'd just gone with the 790. /forums/images/graemlins/mad.gif

Arghh.
 
   / 4210 syncshift funkyness #4  
It shifted ok when new, a friend of mine also has a 4200, his shifted worse than mine. The dealer came by and lubed and adjusted. Mine works ok now, just need to shoot a little WD-40 after working in a lot of dust. I also know a guy with a 790, he's happy with it, but he wishes he got a 4000 series /forums/images/graemlins/grin.gif
 

Tractor & Equipment Auctions

STOP!!!! PLEASE READ ALL TERMS BEFORE BIDDING!!! UPDATED TERMS!! (A50775)
STOP!!!! PLEASE...
2019 FORD F-650 SUPER DUTY BOX TRUCK (A51406)
2019 FORD F-650...
2016 Volvo A25G 20CuYd Articulated Dump Truck (A49346)
2016 Volvo A25G...
REYNOLDS 100 - 8 YARD PULL TYPE SCRAPER PAN WITH DRAWBAR (A51039)
REYNOLDS 100 - 8...
2021 McFarlane IC-5140 Vertical Tillage Tool (A50657)
2021 McFarlane...
2022 JCB HM180T Hydraulic Breaker Excavator Attachment (A49461)
2022 JCB HM180T...
 
Top