430 bucket teeth

Harv · Apr 17, 2001

Re:toothbars

John -

I'd run out to the shop and measure my bucket, but it's dark now. Plus my shop is 120 miles from my house. /w3tcompact/icons/laugh.gif

It's a Kubota LB400-A, which is spec'd as 60.0 inches wide. Don't know if that's an inside or outside dimension.

If I can get a new bar for 250 bucks, this thing might just happen! Dang it, John -- you're getting me all excited again! /w3tcompact/icons/crazy.gif

Thanks for the info!

And Bird -- thanks for sharing your attack of laziness with us. Twenty bucks for having it done right (should the need arise) sounds like a bargain. I've hired a local welder up at the property only once so far, and that was to create and install a couple of wrought iron railings to help my mom down the 2 front steps. The guy was expensive ($400 for two short railings), but he came highly recommended by all the neighbors. In fact, I had to get on a waiting list to get the job done. I was surprised when he showed up with only a well-used oxy/acetylene rig. But even more surprising was that he was in a wheelchair! /w3tcompact/icons/shocked.gif A total paraplegic, he abandoned his chair to do the actual welding and just dragged himself around to get the job done. This guy was part welder and part artist, both to an impressive degree.

Dunno if he charges less for doing industrial grade work (which he is said to do equally well), but it would be interesting to see what he can do.

Bird · Apr 17, 2001

Re:toothbars

60.0 inches wide. Don't know if that's an inside or outside dimension

Outside, I'll bet, so the toothbar needs to be ~5/8" shorter, but you need to measure to be sure. A toothbar that's just a little too short (fraction of an inch) is no problem; just use washers on the inside of the bucket for spacers, but if it's just a little too long; time for the welder.

BirdEdited by Bird on 04/17/01 08:20 AM (server time).

DDT · Apr 17, 2001

Re:toothbars

Hi Guys, I'm back for a bit. I got my new set from shearfer equipment, Just under $300. including freight, same brand bird has.
DDT

Anonymous Poster · Apr 17, 2001

Re:toothbars

· Toothbars are custom made to fit your bucket
· 1" wide shank allows easier penetration into hard compact materials
· Shanks are made of T-1 material
· Shanks are protected by replaceable points, giving you a longer lasting toothbar

IMPORTANT INFORMATION
When ordering toothbars, give the exact inside width of the bucket and the thickness of the cutting edge on the bucket. Toothbars may be made slightly longer or shorter than the lengths listed to accommodate custom bucket widths. For buckets with bolt-on edge, check for width & tooth combination availability.

Toothbars for Buckets w/Standard & Bolt-on Edge

P/N Approx.Weight No. of Teeth Approx.Width

1036 44 lbs 5 36"
1042 49 lbs 5 42"
1049 56 lbs 6 49"
1054 64 lbs 6 54"
1063 73 lbs 7 63"
1072 83 lbs 8 72"
1082 93 lbs 9 82"
1064* 78 lbs 7** 63"
1073* 88 lbs 8** 72"
1079* 98 lbs 9** 80"

· Toothbars for buckets with bolt on edge,** Quantity of teeth may vary depending on bolt hole pattern.

Also have available Manufacturers Model # of Loader and Bucket.

K.C. Canary – 800 920-7097, Ask for Mark in sales
Tell Mark it’s an Internet Order and John Miller sent ya…{he may charge you more /w3tcompact/icons/smile.gif}

Current price on 54" is $240, 63" is $260. + freight from the Midwest.

Anonymous Poster · Apr 17, 2001

Re:toothbars

Bird...

Didn't you know... That's why God invented grinders.../w3tcompact/icons/smile.gif

MJB · Apr 17, 2001

Re:toothbars

I nominate John Miller III for "poster of the month"./w3tcompact/icons/smile.gif I will be ordering a toothbar for my 430 loader as soon as I can take some exact measurements. Thanks for all the information.

Fugitive from the Cubicle Police

Bird · Apr 17, 2001

Re:toothbars

Yeah, I know, John, and one of these days I'm going to have to buy a bigger, heavier duty one than I have now./w3tcompact/icons/laugh.gif

Bird

dsulli · Apr 20, 2001

Re:Toothbars Available for all buckets

Harv, most people don't realize that 90% of New York is rural, and extends 300 miles North of New York City. I grew up in New York's largest county (St. Lawrence) where the cows outnumber the people by a large number. For that matter, I think the deer and bear outnumber the people also.
As far as the 430 teeth, I like them.

Harv · Apr 21, 2001

Re:Toothbars Available for all buckets

90% of New York is rural

By golly, I think I can actually see that in that Remarkable View Of Earth! /w3tcompact/icons/shocked.gif

Anonymous Poster · Apr 21, 2001

Re:toothbars

Oh No..., give it to Bird... the last time Harv got poster of the month... you saw what happened to him/w3tcompact/icons/frown.gif He now pays $1000. month dues./w3tcompact/icons/wink.gif

Besides, you know what they say about Texas...everything is bigger... bigger wallets, bigger retirements....

Right Bird...?/w3tcompact/icons/blush.gif