4300 to 4310 How much should I pay?

[dmp437]

Slows the tractor down via the tranny.
From the service manual:
"If the engine RPM drops far enough below the setpoint value, the current sent to the transmission drive coils is reduced to allow the engine to recover. The greater the load on the engine, the greater the reduction in current.
The LoadMatch feature will have no effect if the machine is not being driven when the stalling load is being placed on the engine."

 

[sticky]

George,

Unless you have abused your 4300, I would take the 4000 dollars burning a hole in your pocket and buy attatchments. Your 4310 won't do anything your 4300 couldn't do. However, the attatchments will increase your capasity, and you can use them on any tractor.

Wait till you can upgrade to a bigger unit or atleast a current product. The 4310 is no longer in production just like the 4300.