r8f1k
Silver Member
- Joined
- Jul 21, 2018
- Messages
- 196
- Tractor
- Farmall 100, Allis Chalmers D14, International Super MTA, IH 560, Mahindra 4510, Gehl 4500, Clark CY45, JD 800, JD 60
I used my tractor last Saturday to run a compressor off the PTO for 8 hours. The compressor was for running pneumatic pruners. Sunday morning, wouldn't start. Started off of ether, so I have narrowed it down to glow plugs not working. I metered the the plugs, no voltage. The 4 pin relay up front clicks, but nothing. Swapped in a new 4 pin relay, no change. I'm betting either the timer or the 6 pin relay in the dash. There is a timer (No. 15475-6024-2) and a six pin relay (No. 1662-669-210-0), photos below. Is the first photo a relay for the glow plugs or something else? Also, are all 6 pin glow plug relays more or less the same? I found a the same one for about $75, but there is a John Deere unit for around $35. Thoughts?