bzimmel
Member
I have a question regarding my tiller. I have a Kioti CK30. At what speed should I be running my PTO when using the tiller? High or medium?
5' Tiller question
- Thread starter bzimmel
- Start date
- Views: 760
newbury
Super Star Member
- Joined
- Jan 8, 2009
- Messages
- 14,878
- Location
- From Vt, in Va, retiring to MS
- Tractor
- Kubota's - B7610, M4700
What speed is the tiller designed for?
I think there are two "main" designs, 540 RPM and 1,000 RPM. For my 540 RPM I need to run my M4700 engine around 2,200 RPM.
Do you have something on your dash that says PTO speed?
I think there are two "main" designs, 540 RPM and 1,000 RPM. For my 540 RPM I need to run my M4700 engine around 2,200 RPM.
Do you have something on your dash that says PTO speed?
Baby Grand
Elite Member
- Joined
- Nov 12, 2007
- Messages
- 4,663
- Location
- Windsor, CT.
- Tractor
- Kubotas: L3240GST B2320HST B5100D & G5200H
How many teeth on the (tiller) PTO spline?
6 usually means 540; 21 usually means more.
If it works well at 540 PTO RPM with engine at rated PTO RPMs (look for a mark on the tach/check user manual) and low ground speed (< or = to about 1 mph) then that's a good speed to run it.
6 usually means 540; 21 usually means more.
If it works well at 540 PTO RPM with engine at rated PTO RPMs (look for a mark on the tach/check user manual) and low ground speed (< or = to about 1 mph) then that's a good speed to run it.
