5030 HSTC rear work light(s)

[Hootie]

Trying to figure out where to put one or two of these. Anyone have any input? I don't think I want to tap into the cab roof....

 

[slowzuki]

Hello,
I just went through the same thing, I ordered the rear work light switch and pair of brackets from www.tractorsmart.com

I popped the roof off and plugged the switch in and then found out the work light wires had already been run out to the 4 way flasher lights so I hooked the nice kubota brackets up and put my own lights on. The kubota brackets replace the nut holding the 4 way flasher bracket on. I bought some bullet connectors to put on my lights so I didn't have to cut the kubotas wires.

Whole thing took 2 hours including taking the roof off which I could have skipped if I had dug around for the connector a bit more through the switch hole.

I looked into cheaping out on the switch and brackets but really it makes for a clean install.

Total Cost:
For the L5030 cab the rear work light switch is part number T1065-75370 price $27.26

T0270-75310 $5.10 each bracket. (x 2)

El-cheapo 55 w farm type floodlights 10$ ea

 

[AB4D]

Slowzuki,

Do you know whether the switch and brackets you used fit other L30 HSTCs, or do the parts only fit the 5030 HSTC.

Thanks for the information.

Jim.